Đồng hồ đo lưu lượng áp suất cao cho khí EL-FLOW SELECT F-120M Bronkhorst Việt Nam

Mã sản phẩm:

F-120M

Hãng sản xuất:

Bronkhorst

Xuất xứ:

Hà Lan

Liên hệ:

0946452592

Email:

sale01@tmpvietnam.com

Chia sẻ:

Số lượng

Chi tiết sản phẩm

Đồng hồ đo lưu lượng áp suất cao cho khí EL-FLOW SELECT F-120M Bronkhorst Việt Nam

EL-FLOW SELECT F-120M

High-Pressure Mass Flow Meter for Gases

Lowest gas flow rates
Compact design, small internal volume
High accuracy
Virtually pressure and temperature independent

Get a quote Downloads Support

EL-FLOW Select F-120M

Gas Mass Flow Meters for lowest flow rates

Bronkhorst^® model F-120M Mass Flow Meters (MFMs) are suited for precise measurement of flow ranges between 0,2…10 ml_n/min and 0,3…15 ml_n/min at operating pressures up to 200 bar. The MFM consists of a thermal mass flow sensor and a microprocessor based pc-board with signal and fieldbus conversion and a PID controller for optional mass flow control by means of a separately mounted control valve.

EL-FLOW^® Select series are equipped with a digital pc-board, offering high accuracy, excellent temperature stability and fast response. The main digital pc-board contains all of the general functions needed for measurement and control. In addition to the standard RS232 output the instruments also offer analog I/O. As an option, an on-board interface can be mounted to provide DeviceNet™, PROFIBUS DP, Modbus, EtherCAT^®, PROFINET or FLOW-BUS protocols.

Technical specifications

Measurement / control system
Flow range, based on N₂ (intermediate ranges available)	min. 0,2…10 ml_n/min max. 0,3…15 ml_n/min
Accuracy (incl. linearity) (based on actual calibration)	±0,5% Rd plus ±0,1% FS
Turndown	1:50
Multiple fluid capability	storage of max. 8 calibration curves
Repeatability	< 0,2% Rd
Response time	typical 0,5 sec
Operating temperature	-10…+70°C
Temperature sensitivity	zero: < 0,05% FS/°C; span: < 0,05% Rd/°C
Pressure sensitivity	0,1% Rd/bar typical N₂; 0,01% Rd/bar typical H₂
Leak integrity, outboard	tested < 2 x 10^-9 mbar l/s He
Attitude sensitivity	max. error at 90° off horizontal 0,2% at 1 bar, typical N₂
Warm-up time	30 min. for optimum accuracy 2 min for accuracy ± 2% FS

Mechanical parts
Material (wetted parts)	stainless steel 316L or comparable
Pressure rating	200 bar abs
Process connections	compression type or face seal couplings
Seals	standard: Viton^®; options: EPDM, Kalrez^® (FFKM)
Ingress protection (housing)	IP40

Electrical properties
Power supply	+15…24 Vdc
Max. power consumption meter	Supply 15 V 24 V	at voltage I/O 95 mA 65 mA	at current I/O 125 mA 85 mA
Max. power consumption controller	Supply 15 V 24 V	at voltage I/O 290 mA 200 mA	at current I/O 320 mA 215 mA
PROFIBUS DP	add 53 mA (15 V supply) or 30 mA (24 V supply)
PROFINET	add 77 mA (15 V supply) or 48 mA (24 V supply)
EtherCAT®	add 66 mA (15 V supply) or 41 mA (24 V supply)
DeviceNet™	add 48 mA (24 V supply)
Analog output/command	0...5 (10) Vdc or 0 (4)…20 mA (sourcing output)
Digital communication	standard: RS232; options: PROFIBUS DP, DeviceNet™, PROFINET, EtherCAT^®, Modbus RTU or ASCII, FLOW-BUS

Electrical connection
Analog/RS232	9-pin D-connector (male);
PROFIBUS DP	bus: 9-pin D-connector (female); power: 9-pin D-connector (male);
Devicenet™	5-pin M12-connector (male);
EtherCAT®/ PROFINET	2 x RJ45 modular jack (in/out)
FLOW-BUS/Modbus-RTU/ASCII	RJ45 modular jack