Bộ điều khiển lưu lượng nhiệt kiểu công nghiệp cho khí F-200CI Bronkhorst

Mã sản phẩm:
F-200CI
Hãng sản xuất:
Bronkhorst
Xuất xứ:
Hà Lan
Liên hệ:
0946452592
Email:
sale01@tmpvietnam.com
Chia sẻ:
Số lượng
Yêu cầu gọi lại
số điện thoại

Bộ điều khiển lưu lượng nhiệt kiểu công nghiệp cho khí F-200CI Bronkhorst

IN-FLOW F-200CI

Industrial Style Thermal Mass Flow Controller for Gases

  • Lowest gas flow rates
  • Compact design, small internal volume
  • High accuracy and repeatability
  • Virtually pressure and temperature independent
  • Rugged, weatherproof housing (IP65, dust and waterproof)

Get a quote Downloads  Support 

IN-FLOWF-200CI


Industrial Style Gas Mass Flow Controllers for lowest flow rates

Bronkhorst® model F-200CI Mass Flow Controllers (MFCs) are suited for precise measurement of flow ranges between 0,014…0,7 mln/min and 0,6…9 mln/min with pressure rating between vacuum and 64 bar. The MFC consists of a thermal mass flow sensor, a precise control valve and a microprocessor based pc-board with signal and fieldbus conversion. As a function of a setpoint value, the flow controller swiftly adjusts the desired flow rate. The IN-FLOW model is of rugged design (IP65) for use in industrial environments or even Zone 2 hazardous areas, with optional ATEX Cat. 3 or FM Class I, Div. 2 approval.

IN-FLOW series are equipped with a digital pc-board, offering high accuracy, excellent temperature stability and fast response. The main digital pc-board contains all of the general functions needed for measurement and control. In addition to the standard RS232 output the instruments also offer analog I/O. As an option, an on-board interface can be mounted to provide DeviceNet™, PROFIBUS DP, PROFINET, Modbus, or FLOW-BUS protocols.


Technical specifications

Measurement / control system
Flow range, based on N2
(intermediate ranges available)
min. 0,014…0,7 mln/min
max. 0,6…9 mln/min
Accuracy (incl. linearity)
(based on actual calibration)
±0,8% Rd plus ±0,2% FS for F-200CI-005;
±2% FS for F-200CI-002
Turndown 1:50 (in digital mode up to 1:187,5)
Multiple fluid capability storage of max. 8 calibration curves
Repeatability < 0,2% Rd
Settling time (controller) 2…4 seconds
Control stability < ±0,1% FS
Max. Kv-value 6,6 x 10-2
Operating temperature

-10…+70°C;
for ATEX cat. 3 and FM Class 1 Div 2 : 0…50°C

Temperature sensitivity zero: < 0,05% FS/°C; span: < 0,05% Rd/°C
Pressure sensitivity 0,1% Rd/bar typical N2; 0,01% Rd/bar typical H2
Leak integrity, outboard tested < 2 x 10-9 mbar l/s He
Attitude sensitivity max. error at 90° off horizontal 0,2% at 1 bar, typical N2
Warm-up time 30 min. for optimum accuracy
2 min for accuracy ± 2% FS
Mechanical parts
Material (wetted parts) stainless steel 316L or comparable
Pressure rating 64 bar abs
Process connections compression type or face seal couplings
Seals standard: Viton®; options: EPDM, Kalrez® (FFKM)
Weight 1,3 kg
Ingress protection (housing) IP65
Electrical properties
Power supply +15…24 Vdc
Max. power consumption Supply
15 V
24 V
at voltage I/O
290 mA
200 mA
at current I/O
320 mA
215 mA
PROFIBUS DP add 53 mA (15 V supply) or 30 mA (24 V supply)
PROFINET add 77 mA (15 V supply) or 48 mA (24 V supply)
DeviceNet™ add 48 mA (24 V supply)
Analog output/command 0...5 (10) Vdc or 0 (4)…20 mA (sourcing output)
Digital communication standard: RS232;
options: PROFIBUS DP, PROFINET, DeviceNet™, Modbus RTU or ASCII, FLOW-BUS
Electrical connection
Analog/RS232 8 DIN (male);
PROFIBUS DP bus: 5-pin M12 (female);
power: 8 DIN (male);
PROFINET bus: 2 x 5-pin M12 (female) (in/out);
power: 8 DIN (male);
Devicenet™ 5-pin M12 (male);
FLOW-BUS/Modbus-RTU/ASCII 5-pin M12 (male)


Technical specifications and dimensions subject to change without notice.

Bộ điều khiển lưu lượng nhiệt kiểu công nghiệp cho khí F-200CI Bronkhorst

Bình luận của bạn
*
*
 Captcha
Danh mục sản phẩmDanh mục sản phẩm
Hỗ trợ trực tuyến
Liên hệ tư vấn mua hàng
Thống kê truy cập
  • Trực tuyến:
    3
  • Hôm nay:
    23
  • Tuần này:
    6558
  • Tháng trước:
    14451
  • Tất cả:
    1931000
Video ClipVideo Clip
CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

 VPĐD: No 01,  Street 27, Hiep Binh Chanh Ward, Thu Duc District, Ho Chi Minh City, Vietnam

 Ðiện Thoại:  (028) 35121007                Fax: (028) 35121008

 Nhân viên kinh doanh: Hà Văn Nguyên (Mr.)

 Email:  sale01@tmpvietnam.com        Tel:  0946452592     

 VP tại Đức: Am Boscheler Berg 4a 52134 Herzogenrath

 Website: avantgarde-x.de

Thông tin bottom 2

• Đối với khách hàng
Luôn luôn Lắng nghe , Kết nối và Thỏa mãn.

• Đối với công nghiệp hóa
Không ngừng triển khai công nghệ mới – tối ưu hóa thiết bị.

• Đối với đối tác
Phát triển và xây dựng thương hiệu bền vững.

• Đối với nhân viên
Thu hút tài năng, phát triển kỹ năng và cùng phát triển lâu dài.

Thông tin bottom 3
  • Giao hàng miễn phí
  • Bảo hành 12 tháng.
  • Thanh toán linh động.
  • Làm việc các ngày trong tuần.

© 2017 Tangminhphat.com, all right reserved.

Thiết kế website www.webso.vn

Loading...

Back To Top