HM-F Turbine flow meters.

HM-F Turbine flow meters. Solvents, demineralized water, oils

Measuring principle turbine
Measuring ranges from 0.3 to 25,000 l/min in function of the diameter

Output signal Frequency, Analogue 4÷20 mA

Process connection from DN 15 to DN 250

Materials Stainless steel, Carbide

Temperature up to 350°C - Pressure max 400 bar

HM-TCR turbine flow meters serve to accurate measurement of continuous and discontinuous flow rate values. This turbine flow meter is most suited for liquids with low and middle viscosity, such as for example water, emulsions, mixtures containing glycol and light oils. The large range of different pipe connections and structural sizes allows using these flow meters in various applications and in various industrial sectors.

Applications:
• Tap and demineralised water
• Fuels
• Liquefied gases
• Pharmaceutical liquids
• Fuel oil
• Solvents

Features:
• Short response time (> 50 ms)
• Dynamic measuring system
• Temperature: -196°C to +350°C
• Several nominal sizes
• Pressure: up to 400 bar/6,000 psi
• DIN and ASME flanges available as standard (further flanges on request)
• Robust carbide bearings

Đồng hồ đo lưu lượng tuabin HM-F Riels - Đại lý Riels Việt Nam