Van xả ngưng tụ Bekomat Việt Nam - Đại lý phân phối Beko-technologies Việt Nam

Mã sản phẩm:

Condensate discharge with the BEKOMAT

Hãng sản xuất:

Bekomat

Xuất xứ:

Đức

Chia sẻ:

Số lượng

Chi tiết sản phẩm

Van xả ngưng tụ Bekomat Việt Nam - Đại lý phân phối Beko-technologies tại Việt Nam

Condensate discharge with the BEKOMAT^®

Condensation occurs at virtually every point along the compressed air treatment process. In most cases, it contains oil and dirt particles that should not enter the compressed air system. We help you remove condensate from your compressed air and achieve the optimum quality for your application: with the BEKOMAT. The electronic level controlled condensate drain has become synonymous with efficient condensate discharge. Volume-controlled and with intelligent electronics to prevent compressed air losses, it minimises energy expenditure and costs. This is not only our view but that of many renowned compressor manufacturers who recommend the BEKOMAT as they regard it as the safest and most economical condensate discharge unit currently available on the market.

The condensate discharge requirements are ultimately determined by the purpose for which the treated compressed air is used. We aim at offering our customers optimised solutions for their specific applications. With our comprehensive range of condensate drains, we cater for virtually all compressor types and performance levels, system pressures and operating conditions – including of course highly specialised applications.

Condensate drains for individual requirements

BEKOMAT ® standard units

Our comprehensive product portfolio offers the optimum device for every compressor performance and compressor type, for every system pressure and for all operating conditions.

Function of BEKOMAT^®

The BEKOMAT drains off condensate without loss of compressed air, thus reducing energy costs and CO2 emissions. This is made possible by the integrated capacitive sensor, smart electronics for volume-controlled condensate discharge and a proven pilotcontrolled solenoid valve with a special discharge diaphragm.

Cost-effective and reliable: BEKOMAT ^® standard units

The BEKOMAT range provides the 12, 13, 14 and 16 standard units for virtually every application, which are not just the correct solution, rather more also the most suitable low-energy solution. The integrated capacitive sensor for volume-controlled condensate discharge helps save energy and enhances efficiency – which is what you would expect from BEKOMAT.

Unnecessary costs and damage in the compressed air generation can only be efficiently prevented with volume-controlled condensate discharge. For this reason, BEKOMAT condensate drain therefore functions with a capacitive sensor. The intelligent electronics prevent compressed air losses and minimise energy consumption. Due to this the electronically regulated condensate discharge, the drain often amortises itself within half a year compared to devices with time-controlled drain valves.

Condensate discharge without compressed air loss

If a float drain leaks, then high costs arise as a result of leaks. Time-controlled solenoid valves also cause compressed air losses. During the valve opening, expensively generated compressed air escapes unused into the environment. In contrast a level-controlled condensate drain guarantees discharge without any compressed air loss i.e. also energy loss. This not only saves energy and costs, but also CO₂ emissions.

Robust and reliable

The standard design is made in corrosion-resistant aluminium, which makes the BEKOMAT particularly reliable and robust. A silver-coloured coating protects the outside of the housing. The BEKOMAT CO models are predestined for operating with oil-free or aggressive condensates. Their housing is additionally, completely glass bead blasted and protected by a high-quality hard coating.

Image right: Aluminium finish in the standard version, CO hard-coated for oil-free and aggressive condensates.

BEKOMAT^® 20 | 20FM for Filters and water separators

The BEKOMAT 20 FM with integrated filter management (filter status time display and filter status control) is a cost-effective monitoring solution for the connected filter element. It is designed as a robust condensate drain for water separators, filters or similar applications and can be used both in systems with oil-lubricated as well as with oil-free compressors. The plastic housing of the BEKOMAT 20 FM is equipped with an internal aluminium condensate container. The front panel is visible and can be operated from the top and the front.

Advantages of BEKOMAT^® standard units

Technical data BEKOMAT^® Standard

	BEKOMAT 12	BEKOMAT 13	BEKOMAT 14	BEKOMAT 16
Maximum compressor performance	6,5 m³/min	30 m³/min	130 m³/min	1400 m³/min
Maximum refrigeration dryer performance	13 m³/min	60 m³/min	260 m³/min	2800 m³/min
Maximum filter performance*	65 m³/min	300 m³/min	1300 m³/min

* Further technical data can be found in the product information below in the download area ...

Matching maintenance kit

The BEKOMAT must also be serviced from time to time. We therefore provide a suitable set of wearing parts. Of course you can also contact our service technicians. In addition, we can make an assessment of your entire compressed air treatment system and assist you with the optimisation accordingly.

Order a set...

BEKOMAT	12	12CO	13	13CO	13 CO PN 24/40/50	14	14CO	14CO PN 25	16CO
Wearing parts set	2000049	2000748	2000067	2000067	2000366	2000731	2000731	2002556	2000087

BEKOMAT^® with service concept – quick and economic

The innovative design of the BEKOMAT 31U, 32U, 33U and 33U CO series enables simplified handling as well as installation and maintenance with minimum time expenditure. The devices consist of no more than three units joined together with quick-release connectors. The control and sensor units are only installed once, only the service unit (including all wear and pressure parts) needs to be exchanged for maintenance purposes. This robust condensate drain is suitable for both oil-contaminated and oil-free, aggressive condensates.

Comfortable and simplified maintenance

A service indicator informs punctually about the upcoming maintenance and/or exchange for the service unit. All parts which are subject to wear or are pressurised can be reached with one manual movement. Neither electrical installations nor the installation of seals and individual parts are necessary. The installation concept is also particularly user-friendly and time-saving: The device only has to be connected once electrically. The robust housing is also waterproof according to IP67. BEKOMAT 31U | 32U facilitates the connection to the compressed air system with an angle adaptor.
If the service unit of the BEKOMAT 33U is disconnected from the power supply and condensate receiver tank, then the supply tank always remains connected to the compressed air system. This saves time and effort during maintenance.

Advantages of BEKOMAT^® with service concept

Plug & Play:

No weekly inspections, sieve inspections or cleaning required

Service-Unit

Pressure and function tested with two-year warranty
Power and alarm signalling as standard
For operation at temperatures up to +70°C

Ease of installation and maintenance-free

Versatile connection options
Easy exchange of service unit, even in confined spaces
No installation work during maintenance

Fully automatic operation and monitoring

Connection for modern system monitoring
In case of increased contamination, a self-cleaning process starts automatically
Service indicator for punctual exchange of the service unit

BEKOMAT^® Service Units - Technical data

	BEKOMAT 31U	BEKOMAT 32U	BEKOMAT 33U/33U CO
Maximum compressor performance	2,5 m³/min	5 m³/min	10 m³/min
Maximum refrigeration dryer performance	5 m³/min	10 m³/min	20 m³/min
Maximum filter performance*	25 m³/min	50 m³/min	100 m³/min

* Further technical data can be found in the product information below in the download area ...

Service-Unit

Like all high-performance devices, the BEKOMAT needs to be serviced from time to time. This is done with our service unit containing all the necessary wearing parts. If you require assistance, contact our service technicians, who are also qualified to examine and assess your entire compressed air system for further optimisation.

Contact Service

BEKOMAT	31U	32U	33U	33CO
Service-Unit	4023607	4023571	4023633	4023635

Our BEKOMAT^® solutions for special requirements

Based on our decades of experience, we have developed and implemented numerous additional functions for special requirements for our customers in a wide variety of industries, following on from on the classic advantages of the BEKOMAT. These have proved themselves in a wide variety of application areas - you can also now benefit from our unique know-how.

With no-load valve especially for high pressure, multi-stage and turbo compressors

BEKOMAT 03/06/LA/LALP

Should the operating pressure of the compressor drop below 1.2 bar (e.g. with multi-stage compressors in the idling stage), then an additional no load valve opens. The condensate can then discharge without pressure. If the operating pressure exceeds 1.2 bar again, then the no-load valve closes and the BEKOMAT operates in its standard function.
The LP version has been specially designed for operating pressures that can drop to as low as 0.4 bar. High pressure versions are available for operating pressures up to PN 25 and/or PN 63 bar.

For applications in vacuum systems

BEKOMAT 03/06 VAC

The BEKOMAT VACU condensate drain has been specially designed for draining condensate and other media from negative pressure and vacuum systems with an operating pressure of 0.1 to 1.8 bar (absolute). They are also suitable for ongoing, process engineering processes under normal atmosphere. Designed to fulfil your specific requirements, the robust, volume-controlled condensate drain is designed and built as a hard-coated version or as stainless steel.

For applications in large compressors

BEKOMAT 08/09

The complete housing of this BEKOMAT condensate drain is made of cast stainless steel and is therefore designed for use in aggressive atmospheres, as well as for the discharge of condensates from special gas compression. They are mainly utilised in petroleum plants and refineries, in the petrochemical industry and in crude or mineral oil plants. These are the largest electronically level-controlled condensate drain systems available on the market and have been specially designed and built for these requirements.

Also as ATEX version!

With EC-Type Examination Certificate for use in explosive environments, these BEKOMAT condensate drains are approved for use in potentially explosive atmospheres according to ll 2G Ex ib llB T4 Gb. THE BVS 03 ATEX W 124 certificate of confirmity approves the applicability for explosive hazardous areas. Malfunctions in the condensate drain off are indicated and reported by the integrated self-monitoring with NAMUR interface. This therefore requires an external power supply, a switching amplifier is recommended.