Công ty TNHH TM và DV Tăng Minh Phát Việt là nhà phân phối chính thức các thiết bị hãng CS-Instrument tại Việt Nam. Đại lý CS-Instrumento tại Việt Nam - CS-Instrument Vietnam
Thông tin sản phẩm của hãng: Product CS-Instruments German
Thông tin sản phẩm của TMP : Sản phẩm hãng CS-Instruments TMP
+ Chúng tôi chuyên cung cấp các thiết bị :
CS Instrument :
- Thiết bị đo điểm sương cầm tay CS Instrument Việt Nam
- Đồng hồ đo lưu lượng khí CS Instrument Việt Nam
- Đồng hồ đo lượng khí mặt bích CS Instrument Việt Nam
- Đồng hồ đo lượng khí nén CS Instrument Việt Nam
- Thiết bị phát hiện dầu CS Instrument Việt Nam
- Cảm biến áp suất khí CS Instrument Việt Nam
- Thiết bị đo nhiệt độ điểm sương CS Instrument Việt Nam
- Thiết bị đo rò rỉ khí nén CS Instrument Việt Nam
- Thiết bị quản lý chất lượng hệ thống khí nén CS Instrument Việt Nam
- Thiết bị đo điện năng CS Instrument Việt Nam
Các dòng sản phẩm của hàng CS Instrument Việt Nam:
Cata- log- ue page |
Description | Device | ||
CHART RECORDER | ||||
4-13 | Intelligent chart recorder for compressed air and gases Measurement - control - indication - alarm - recording - evaluation | DS 500 + Accessories | ||
14-25 | Intelligent mobile chart recorder Energy analysis - consumption measurement - leakage calculation at compressed air systems |
DS 500 mobile + Accessories |
||
18-25 | Affordable mobile chart recorder, Energy analysis - flow measurement - leckage calculation at compressed air systems | DS 400 mobile | ||
26 | Mobile current/effective power meter suitable for DS 500/ DS 400 mobile | CS PM 600 | ||
27 | CS ENERIUM 30 Current/effective power meter for panel mounting |
CS ENERIUM 30 | ||
28-34 | Hand-held instrument e.g. for flow measurement | PI 500 | ||
HUMIDITY/DEW POINT MEASUREMENT | ||||
40-45 | Portable dew point meter for relative humidity, temperature, dew point measurement |
DP 500 / DP 510 | ||
46-47 | Portable dew point meter with integrated pressure sensor | DP 400 mobile | ||
50-51 | Dew point sensor for membrane and desiccant driers | FA 510/515 DS 52-Set |
||
52-53 | Dew point sensor for refrigeration driers | FA 510/515 DS 52-Set |
||
54-59 | Dew point set for compressed air and gases | DS 400 | ||
60-61 | Dew point measurement for refrigeration, membrane and desiccant dryers |
FA 500 | ||
62 | Dew point measurement in explosive areas | FA 515 Ex | ||
62 | Accessories mains units | |||
63-64 | Accessories for dew point measurement and calibration | |||
FLOW/CONSUMPTION MEASUREMENT | ||||
69-80 | Precise flow measurement for compressed air and gases for heavy duty industrial applications |
VA 550/570 (ATEX) | ||
81-89 | Flow sensors for compressed air and gases | VA 500/520 | ||
90-97 | Flow station for compressed air and gases | DS 400 | ||
98-99 | Flow direction switch for compressed air systems | VA 409 | ||
100 | Useful accessories: Measuring sections, Drilling jig | |||
101 | Useful accessories: Spot drilling collars, thickness meter | |||
103 | Calibration of flow sensors | |||
Cata- log- ue page |
Description | Device | ||
Compressed air quality according to ISO 8573 | ||||
108-113 | Compressed air quality measurement according to ISO 8573 |
OIL-Check/PC 400 | ||
LEAKAGE MEASUREMENT | ||||
114-117 | Leak detector with camera | LD 500 / 510 | ||
118-119 | Leak detector for compressed air systems | LD 400 | ||
PRESSURE MEASUREMENT | ||||
120-121 | Differential Pressure Sensor 1.6 bar diff | Differential pressure sensor |
||
DIGITAL DISPLAYS | ||||
122-123 | Digital displays for wall or panel mounting | DS51 / DS52 | ||
Calibration | ||||
64 | Calibration services for dew point, relative humidity | |||
103 | Calibration services for flow sensors | |||
Re-calibration and service | ||||
Products not included in the catalogue: | ||||
FA 540 dew point sensor with same pinning at M12 plugas FA 410 | FA 540 | |||
FA 545 dew point sensor with same pinning at M12 plugas FA 415 | FA 545 | |||
Terms & Conditions | ||||
Price list 2019 | ||||
DS 500 - Intelligent chart recorder | ||||
Catalogue page 8 | Order no. | |||
DS 500 - intelligent chart recorder in basic version (4 sensor inputs) | 0500 5000 | |||
Option 4 additional sensor inputs for DS 500 | Z500 5001 | |||
Option 8 additional sensor inputs for DS 500 | Z500 5002 | |||
Option Integrated webserver | Z500 5003 | |||
Option "consumption report" statistics, daily/weekly/monthly report | Z500 5004 | |||
Option version for panel mounting | Z500 5006 | |||
Option power supply 24VDC (instead of 100...240 VAC) | Z500 5007 | |||
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels, (mathematical functions: addition, subtraction, division, multiplication) |
Z500 5008 | |||
Option: "Totalizer function for analogue signals" | Z500 5009 | |||
External Gateway PROFIBUS for RS 485 interface connection | Z500 3008 | |||
External Gateway PROFINET for RS 485 interface connection | Z500 3009 | |||
Software: | ||||
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet |
0554 7040 | |||
CS Soft Network - Database Client/Server Solution (up to 5 DS 500) - database (MySQL) to Server - data evaluation via Client-Software |
0554 7041 | |||
CS Soft Network - Database Client/Server Solution (up to 10 DS 500) - database (MySQL) to Server - data evaluation via Client-Software |
0554 7042 | |||
CS Soft Network - Database Client/Server Solution (up to 20 DS 500) - database (MySQL) to Server - data evaluation via Client-Software |
0554 7043 | |||
CS Soft Network - Database Client/Server Solution (> 20 DS 500) - database (MySQL) to Server - data evaluation via Client-Software |
0554 7044 | |||
Software Support / h | 9999 9998 | |||
Flow sensor VA 500 | ||||
Catalogue page 9 | Order no. | |||
VA 500 flow sensor, with RS 485 interface (Modbus-RTU), with analogue output 4...20mA and pulse output (galvanically separated) | 0695 5001 | |||
Max. Version (185 m/s) | Z695 5003 | |||
HighSpeed version (224 m/s) | Z695 5002 | |||
Display | Z695 5000 | |||
M-Bus (pulse output not available) | Z695 5004 | |||
Sensor length 120 mm | ZSL 0120 | |||
Sensor length 160 mm | ZSL 0160 | |||
Sensor length 220 mm | ZSL 0220 | |||
Sensor length 300 mm | ZSL 0300 | |||
Sensor length 400 mm | ZSL 0400 | |||
Sensor length 500 mm | ZSL 0500 | |||
Sensor length 600 mm | ZSL 0600 | |||
Sensor length 700 mm | ZSL 0700 | |||
Ball valve I/I G 1/2" stainless steel | 3300 0002 | |||
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 | 3300 0006 | |||
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 | 3300 0007 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
9 | Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | ||
Oil and fat free, special cleaning | 0699 4005 | |||
5 point precision calibration of new instrument with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
Flow sensor VA 520 with integrated measuring section | ||||
Catalogue page 9 | Order no. | |||
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 | 0695 0520 | |||
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 | 0695 0521 | |||
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 | 0695 0522 | |||
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 | 0695 0523 | |||
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 | 0695 0526 | |||
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 | 0695 0524 | |||
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 | 0695 0525 | |||
Option signal output / bus connection | ||||
M-Bus (pulse output not available) | Z695 5004 | |||
Connection cables: | ||||
Connection cable for VA/FA, 5 m, with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m, with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m, with M12 plug | 0553 0120 | |||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
Option: special cleaning | 0699 4005 | |||
5 point precision calibration with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
Further accessories: | ||||
Closing cap for measuring section in aluminium | 0190 0001 | |||
Closing cap for measuring section stainless steel 1.4404 | 0190 0002 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
Flow measurment VA 500/ VA 520 for below gases | ||||
Order no. | ||||
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane | on request | |||
Dew point sensors FA 510 | ||||
9 | Order no. | |||
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface | 0699 0510 | |||
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface | 0699 0512 | |||
Measuring chamber with inner threat G1/2" and mounted male coupling DN 7,2 for quick-lock coupling |
0699 3390 | |||
More measuring chambers please see on catalogue page 60 | ||||
Connection cables for VA/FA sensors | ||||
Order no. | ||||
Connection cable for VA/FA, 5 m with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m with M12 plug | 0553 0120 | |||
Pressure sensors | ||||
Catalogue page 9 | Order no. | |||
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale | 0694 1886 | |||
Precision pressure sensor CS 16, accuracy ± 0.5 % | 0694 3555 | |||
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale | 0694 0356 | |||
Precision Pressure sensor CS 40, accuracy ± 0.5 % | 0694 3930 | |||
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale | 0694 3550 | |||
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale | 0694 3556 | |||
Standard pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale | 0694 3554 | |||
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale | 0694 3557 | |||
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale | 0694 3558 | |||
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale | 0694 3559 | |||
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale | 0694 3553 | |||
Precision differential pressure sensor CS 0…400 mbar differential pressure, accuracy: 0.075 % of full scale, static pressure max. 40 bar |
0694 3560 | |||
Precision pressure sensor CS (0..0.6 bar) accuracy ± 0.5 % | 0694 3549 | |||
Calibration of pressure sensor 5 points between 0 and 10/16 bar | 3200 0004 | |||
Precision differential pressure sensor for further measuring, ranges, e. g. 0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar |
on request | |||
Temperature sensors | ||||
9 | Order no. | |||
Screw-in temperature probe PT 100 class A, length: 300 mm, d=6mm, with integrated transducer 4…20 mA = -50°C…+500°C (2-wire) |
0604 0201 | |||
Outdoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm), temperature range: -50°C to +80°C |
0604 0203 | |||
Indoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm), temperature range: -50°C to +80°C |
0604 0204 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 300 mm, d=6 mm, -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0205 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0206 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0207 | |||
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100 class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends |
0604 0208 | |||
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar material: stainless steel, temperature range: max. +260°C |
0554 0200 | |||
Clamp screwing 6mm; G 1/2" stainless steel clamp ring pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C |
0554 0201 | |||
Connection cables for pressure/temperature sensors | ||||
9 | Order no. | |||
Connection cable for sensors 5 m, with open ends | 0553 0108 | |||
Connection cable for sensors 10 m, with open ends | 0553 0109 | |||
Clamp-on meters | ||||
9 | Order no. | |||
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends | 0554 0510 | |||
Clamp-on ammeter 0…1000 A RMS, 4…20 mA = 0…1000 A, 10-30 VDC, 3 m connection cable with open ends | 0554 0518 | |||
Calibration certificate for clamp-on ammeters, 5 calibration points | 0554 3333 | |||
CS ENERIUM 30 Current/effective power meter for panel mounting | ||||
Catalogue page 10 | Order no. | |||
CS ENERIUM 30 Current/effective power meter for panel mounting, with RS 485 Interface |
0554 5355 | |||
Current transformer 100/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm) |
0554 5344 | |||
Current transformer 200/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm) |
0554 5345 | |||
Current transformer 300/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5346 | |||
Current transformer 500/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5347 | |||
Current transformer 600/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5348 | |||
Current transformer 1000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 65 x 32 mm) |
0554 5349 | |||
Current transformer 2000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 127 x 38 mm) |
0554 5350 | |||
Connection cable CS ENERIUM 30: | Order no. | |||
Connection cable for sensors 5 m, with open ends | 0553 0108 | |||
Connection cable for sensors 10 m, with open ends | 0553 0109 | |||
Connection cable variable length, open ends on both sides | 0553 0126 | |||
DS 500 mobile - intelligent chart recorder | ||||
Catalogue page 15 | Order no. | |||
Intelligent chart recorder DS 500 mobile, 4 sensor inputs | 0500 5012 | |||
Intelligent chart recorder DS 500 mobile, 8 sensor inputs | 0500 5013 | |||
Intelligent chart recorder DS 500 mobile, 12 sensor inputs | 0500 5014 | |||
Option “integrated Webserver” | Z500 5003 | |||
Option “consumption report” statistics, daily/weekly/monthly report | Z500 5004 | |||
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels, (mathematical functions: addition, subtraction, division, multiplication) |
Z500 5008 | |||
Option: "Totalizer function for analogue signals" | Z500 5009 | |||
Software: | ||||
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet |
0554 7040 | |||
CS Soft Energy Analyzer for energy and leakage analysis of compressed air stations | 0554 7050 | |||
Software Upgrade of the already existing CS Soft Basic to CS Soft Energy Analyzer | 0554 7045 | |||
GSM module for data transfer via the GSM network (mobile network) | on request | |||
Connection cables: | ||||
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 5 m | 0553 0501 | |||
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 10 m | 0553 0502 | |||
Connection cable for VA/FA 5xx series on mobile instruments,ODU / M 12, 5 m | 0553 1503 | |||
Connection cable for VA/FA 400 series on mobile instruments,ODU / M 12, 5 m | 0553 0503 | |||
Extension cable for mobile instruments,ODU / ODU, 10 m | 0553 0504 | |||
Connection cable for mobile current/effective power meter to DS 500 mobile, 5 m | 0553 0506 | |||
Adapter for connection cable ODU 5 to 8 pole for existing cable part no. 0553.0111 (for VA/FA sensors) from DS 300 mobile to DS 500 mobile |
0553 0507 | |||
Adapter for connection cable ODU 5 to 8 pole for existing cable part no. 0553.0110 (for analogue) from DS 300 mobile to DS 500 mobile |
0553 0508 | |||
Mounted Odu plug for connection on mobile instruments | Z604 0104 | |||
Case for all sensors (dimensions: 500 x 360 x 180 mm) | 0554 6006 | |||
Flow sensors VA 500 | ||||
Catalogue page 24 | Order no. | |||
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl. 5 m cable to mobile instruments |
0695 1124 | |||
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm incl. 5 m cable to mobile instruments |
0695 1125 | |||
Sensor length 120 mm | ZSL 0120 | |||
Sensor length 160 mm | ZSL 0160 | |||
Sensor length 220 mm | ZSL 0220 | |||
Sensor length 300 mm | ZSL 0300 | |||
Sensor length 400 mm | ZSL 0400 | |||
Sensor length 500 mm | ZSL 0500 | |||
Sensor length 600 mm | ZSL 0600 | |||
Sensor length 700 mm | ZSL 0700 | |||
Ball valve I/I G 1/2" stainless steel | 3300 0002 | |||
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 | 3300 0006 | |||
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 | 3300 0007 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
Oil and fat free, special cleaning | 0699 4005 | |||
5 point precision calibration with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
Flow sensor VA 520 with integrated measuring section | ||||
24 | Order no. | |||
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 | 0695 0520 | |||
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 | 0695 0521 | |||
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 | 0695 0522 | |||
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 | 0695 0523 | |||
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 | 0695 0526 | |||
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 | 0695 0524 | |||
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 | 0695 0525 | |||
Flow measurment VA 500/ VA 520 for below gases | ||||
Order no. | ||||
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane | on request | |||
Dew point sensors FA 510 | ||||
24 | Order no. | |||
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd incl. mobile measuring chamber, 5 m cable and perforated cap |
0699 1510 | |||
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd incl. mobile measuring chamber, 5 m cable and perforated cap |
0699 1512 | |||
Connection cables for VA/FA sensors | ||||
24 | Order no. | |||
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m | 0553 1503 | |||
Extension cable for mobile instruments ODU/ODU, 10m | 0553 0504 | |||
Calibration certificates for flow sensors / dew point sensors | ||||
24 | Order no. | |||
5 point precision calibration for consumption sensors including ISO certificate | 3200 0001 | |||
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate | 0699 3396 | |||
Pressure sensors | ||||
Catalogue page 24 | Order no. | |||
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale | 0694 1886 | |||
Precision pressure sensor CS 16, accuracy ± 0.5 % | 0694 3555 | |||
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale | 0694 0356 | |||
Precision Pressure sensor CS 40, accuracy ± 0.5 % | 0694 3930 | |||
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale | 0694 3550 | |||
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale | 0694 3556 | |||
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale | 0694 3554 | |||
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale | 0694 3557 | |||
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale | 0694 3558 | |||
Standard pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale | 0694 3559 | |||
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale | 0694 3553 | |||
Precision differential pressure sensor CS 0…400 mbar differential pressure, accuracy: 0.075 % of full scale, static pressure max. 40 bar |
0694 3560 | |||
Precision pressure sensor CS (0..0.6 bar) accuracy ± 0.5 % | 0694 3549 | |||
Calibration of pressure sensor 5 points between 0 and 10/16 bar | 3200 0004 | |||
Precision differential pressure sensor for further measuring, ranges, e. g. 0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar |
on request | |||
Temperature sensors | ||||
25 | Order no. | |||
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm, d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments |
0604 0200 | |||
Screw-in temperature probe PT 100 class A, length: 300 mm, d=6mm, with integrated transducer 4…20 mA = -50°C…+500°C (2-wire) |
0604 0201 | |||
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments | 0604 0202 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 300 mm, d=6 mm, -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0205 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0206 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0207 | |||
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100 class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends |
0604 0208 | |||
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar material: stainless steel, temperature range: max. +260°C |
0554 0200 | |||
Clamp screwing 6mm; G 1/2" stainless steel clamp ring pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C |
0554 0201 | |||
Connection cables for pressure/temperature sensors | ||||
25 | Order no. | |||
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU / open ends, 5 m |
0553 0501 | |||
Connection cable for pressure, temperature, or external sensors on mobile instruments, ODU / open ends, 10 m |
0553 0502 | |||
Extension cable for mobile instruments ODU/ODU, 10m | 0553 0504 | |||
Mounted Odu plug for connection on mobile instruments | Z604 0104 | |||
Clamp-on meters | ||||
25 | Order no. | |||
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin | 0554 0511 | |||
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC, 3 m connection cable with ODU-plug (8 poles) for mobile devices |
0554 0519 | |||
Calibration certificate for clamp-on ammeters, 5 calibration points | 0554 3333 | |||
Current/effective power meter up to 32 A | ||||
Order no. | ||||
CS PM 532 | ||||
Current/effective power meter up to 32 A in a carrying case | 0554 5340 | |||
CS PM 600 Current/effective power meter | ||||
26 | Order no. | |||
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m | 0554 5341 | |||
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m | 0554 5342 | |||
Current transformer 100A/1A consisting of 3 transformers for mobile devices | Z554 0001 | |||
Current transformer 600A/1A consisting of 3 transformers for mobile devices | Z554 0002 | |||
Current transformer 1000A/1A consisting of 3 transformers for mobile devices | Z554 0003 | |||
CS ENERIUM 30 Current/effective power meter for panel mounting | ||||
Catalogue page 27 | Order no. | |||
CS ENERIUM 30 Current/effective power meter for panel mounting, with RS 485 Interface |
0554 5355 | |||
Current transformer 100/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm) |
0554 5344 | |||
Current transformer 200/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm) |
0554 5345 | |||
Current transformer 300/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5346 | |||
Current transformer 500/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5347 | |||
Current transformer 600/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5348 | |||
Current transformer 1000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 65 x 32 mm) |
0554 5349 | |||
Current transformer 2000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 127 x 38 mm) |
0554 5350 | |||
Connection cable CS ENERIUM 30: | ||||
Connection cable for sensors 5 m, with open ends | 0553 0501 | |||
Connection cable for sensors 10 m, with open ends | 0553 0502 | |||
Mobile chart recorder DS 400 mobile | ||||
Catalogue page 20 | Order no. | |||
Product | Sensor input 1+2 | Sensor input 3+4 | ||
DS 400 mobile - mobile chart recorder with graphic display and touch screen | Digital | ---------- | 0500 4012 D | |
Digital | Digital | 0500 4012 DD | ||
Digital | Analogue | 0500 4012 DA | ||
Analogue | ---------- | 0500 4012 A | ||
Analogue | Analogue | 0500 4012 AA | ||
Options: | ||||
Integrated Ethernet- and RS 485 interface | Z500 4004 | |||
Integrated webserver | Z500 4005 | |||
"Mathematics calculation function" for 4 freely selectable channels, (virtual channels): addition, subtraction, division, multiplication |
Z500 4007 | |||
"Totalizer function for analogue signals" | Z500 4006 | |||
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...) | Z500 4001 | |||
2 additional sensor inputs for digital sensors (SDI/Modbus) | Z500 4003 | |||
Further Accessories: | ||||
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet |
0554 7040 | |||
CS Soft Energy Analyzer for energy and leakage analysis of compressed air stations | 0554 7050 | |||
Software Upgrade of the already existing CS Soft Basic to CS Soft Energy Analyzer | 0554 7045 | |||
Connection cable for VA/FA 5xx series on mobile instruments,ODU / M 12, 5 m | 0553 1503 | |||
Connection cable for VA/FA 400 series on mobile instruments,ODU / M 12, 5 m | 0553 0503 | |||
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 5 m | 0553 0501 | |||
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 10 m | 0553 0502 | |||
Extension cable for mobile instruments,ODU / ODU, 10 m | 0553 0504 | |||
Connection cable for mobile current/effective power meter to DS 500 mobile, 5 m | 0553 0506 | |||
Case for all sensors (Dimensions: 500 x 360 x 120 mm) | 0554 6006 | |||
Flow sensor VA 500 | ||||
Catalogue page 24 | Order no. | |||
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl. 5 m cable to mobile instruments |
0695 1124 | |||
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm incl. 5 m cable to mobile instruments |
0695 1125 | |||
Sensor length 120 mm | ZSL 0120 | |||
Sensor length 160 mm | ZSL 0160 | |||
Sensor length 220 mm | ZSL 0220 | |||
Sensor length 300 mm | ZSL 0300 | |||
Sensor length 400 mm | ZSL 0400 | |||
Sensor length 500 mm | ZSL 0500 | |||
Sensor length 600 mm | ZSL 0600 | |||
Sensor length 700 mm | ZSL 0700 | |||
Ball valve I/I G 1/2" stainless steel | 3300 0002 | |||
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 | 3300 0006 | |||
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 | 3300 0007 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
Oil and fat free, special cleaning | 0699 4005 | |||
5 point precision calibration with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
Flow sensor VA 520 with integrated measuring section | ||||
24 | Order no. | |||
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 | 0695 0520 | |||
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 | 0695 0521 | |||
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 | 0695 0522 | |||
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 | 0695 0523 | |||
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 | 0695 0526 | |||
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 | 0695 0524 | |||
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 | 0695 0525 | |||
Flow measurment VA 500/ VA 520 for below gases | ||||
Order no. | ||||
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane | on request | |||
Dew point sensors FA 510 | ||||
24 | Order no. | |||
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd incl. mobile measuring chamber, 5 m cable and perforated cap |
0699 1510 | |||
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd incl. mobile measuring chamber, 5 m cable and perforated cap |
0699 1512 | |||
Connection cables for VA/FA sensors | ||||
24 | Order no. | |||
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m | 0553 1503 | |||
Extension cable for mobile instruments ODU/ODU, 10m | 0553 0504 | |||
Calibration certificates for flow sensors / dew point sensors | ||||
24 | Order no. | |||
5 point precision calibration for consumption sensors including ISO certificate | 3200 0001 | |||
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate | 0699 3396 | |||
Pressure sensors | ||||
Catalogue page 24 | Order no. | |||
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale | 0694 1886 | |||
Precision pressure sensor CS 16, accuracy ± 0.5 % | 0694 3555 | |||
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale | 0694 0356 | |||
Precision Pressure sensor CS 40, accuracy ± 0.5 % | 0694 3930 | |||
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale | 0694 3550 | |||
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale | 0694 3556 | |||
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale | 0694 3554 | |||
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale | 0694 3557 | |||
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale | 0694 3558 | |||
Standard pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale | 0694 3559 | |||
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale | 0694 3553 | |||
Precision differential pressure sensor CS 0…400 mbar differential pressure, accuracy: 0.075 % of full scale, static pressure max. 40 bar |
0694 3560 | |||
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % | 0694 3549 | |||
Calibration of pressure sensor 5 points between 0 and 10/16 bar | 3200 0004 | |||
Precision differential pressure sensor for further measuring, ranges, e. g. 0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar |
on request | |||
Temperature sensors | ||||
25 | Order no. | |||
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm, d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments |
0604 0200 | |||
Screw-in temperature probe PT 100 class A, length: 300 mm, d=6mm, with integrated transducer 4…20 mA = -50°C…+500°C (2-wire) |
0604 0201 | |||
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments | 0604 0202 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 300 mm, d=6 mm, -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0205 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0206 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0207 | |||
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100 class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends |
0604 0208 | |||
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar material: stainless steel, temperature range: max. +260°C |
0554 0200 | |||
Clamp screwing 6mm; G 1/2" stainless steel clamp ring pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C |
0554 0201 | |||
Connection cables for pressure/temperature sensors | ||||
25 | Order no. | |||
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU / open ends, 5 m |
0553 0501 | |||
Connection cable for pressure, temperature, or external sensors on mobile instruments, ODU / open ends, 10 m |
0553 0502 | |||
Extension cable for mobile instruments ODU/ODU, 10m | 0553 0504 | |||
Mounted Odu plug for connection on mobile instruments | Z604 0104 | |||
Clamp-on meters | ||||
25 | Order no. | |||
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin | 0554 0511 | |||
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC, 3 m connection cable with ODU-plug (8 poles) for mobile devices |
0554 0519 | |||
Calibration certificate for clamp-on ammeters, 5 calibration points | 0554 3333 | |||
Current/effective power meter up to 32 A | ||||
Order no. | ||||
CS PM 532 | ||||
Current/effective power meter up to 32 A in a carrying case | 0554 5340 | |||
CS PM 600 Current/effective power meter | ||||
26 | Order no. | |||
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m | 0554 5341 | |||
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m | 0554 5342 | |||
Current transformer 100A/1A consisting of 3 transformers for mobile devices | Z554 0001 | |||
Current transformer 600A/1A consisting of 3 transformers for mobile devices | Z554 0002 | |||
Current transformer 1000A/1A consisting of 3 transformers for mobile devices | Z554 0003 | |||
CS ENERIUM 30Current/effective power meter for panel mounting | ||||
Catalogue page 27 | Order no. | |||
CS ENERIUM 30 Current/effective power meter for panel mounting, with RS 485 Interface |
0554 5355 | |||
Current transformer 100/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm) |
0554 5344 | |||
Current transformer 200/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm) |
0554 5345 | |||
Current transformer 300/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5346 | |||
Current transformer 500/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5347 | |||
Current transformer 600/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5348 | |||
Current transformer 1000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 65 x 32 mm) |
0554 5349 | |||
Current transformer 2000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 127 x 38 mm) |
0554 5350 | |||
Connection cable CS ENERIUM 30: | ||||
Connection cable for sensors 5 m, with open ends | 0553 0501 | |||
Connection cable for sensors 10 m, with open ends | 0553 0502 | |||
Portable Hand-held instrument PI 500 | ||||
30 | Order no. | |||
PI 500 portable measuring instrument with integrated data logger, incl. power supply | 0560 0511 | |||
Option for PI 500: “mathematics calculat. function” for 4 freely selectable "virtual" channels | Z500 5107 | |||
Option for PI 500: "Totalizer function for analogue signals" | Z500 5106 | |||
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet |
0554 7040 | |||
Transportation case | 0554 6510 | |||
Flow sensor VA 500 | ||||
Catalogue page 31 | Order no. | |||
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl. 5 m cable to mobile instruments |
0695 1124 | |||
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm incl. 5 m cable to mobile instruments |
0695 1125 | |||
Sensor length 120 mm | ZSL 0120 | |||
Sensor length 160 mm | ZSL 0160 | |||
Sensor length 220 mm | ZSL 0220 | |||
Sensor length 300 mm | ZSL 0300 | |||
Sensor length 400 mm | ZSL 0400 | |||
Sensor length 500 mm | ZSL 0500 | |||
Sensor length 600 mm | ZSL 0600 | |||
Sensor length 700 mm | ZSL 0700 | |||
Ball valve I/I G 1/2" stainless steel | 3300 0002 | |||
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 | 3300 0006 | |||
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 | 3300 0007 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
Oil and fat free, special cleaning | 0699 4005 | |||
5 point precision calibration with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
Flow sensor VA 520 with integrated measuring section | ||||
31 | Order no. | |||
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 | 0695 0520 | |||
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 | 0695 0521 | |||
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 | 0695 0522 | |||
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 | 0695 0523 | |||
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 | 0695 0526 | |||
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 | 0695 0524 | |||
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 | 0695 0525 | |||
Flow measurment VA 500/ VA 520 for below gases | ||||
Order no. | ||||
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane | on request | |||
Dew point sensors FA 510 | ||||
31 | Order no. | |||
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd incl. mobile measuring chamber, 5 m cable and perforated cap |
0699 1510 | |||
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd incl. mobile measuring chamber, 5 m cable and perforated cap |
0699 1512 | |||
Connection cables for VA/FA sensors | ||||
31 | Order no. | |||
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m | 0553 1503 | |||
Extension cable for mobile instruments ODU/ODU, 10m | 0553 0504 | |||
Calibration certificates for flow sensors / dew point sensors | ||||
31 | Order no. | |||
5 point precision calibration for consumption sensors including ISO certificate | 3200 0001 | |||
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate | 0699 3396 | |||
Pressure sensors | ||||
Catalogue page 31 | Order no. | |||
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale | 0694 1886 | |||
Precision pressure sensor CS 16, accuracy ± 0.5 % | 0694 3555 | |||
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale | 0694 0356 | |||
Precision Pressure sensor CS 40, accuracy ± 0.5 % | 0694 3930 | |||
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale | 0694 3550 | |||
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale | 0694 3556 | |||
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale | 0694 3554 | |||
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale | 0694 3557 | |||
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale | 0694 3558 | |||
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale | 0694 3559 | |||
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale | 0694 3553 | |||
Precision differential pressure sensor CS 0…400 mbar differential pressure, accuracy: 0.075 % of full scale, static pressure max. 40 bar |
0694 3560 | |||
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % | 0694 3549 | |||
Calibration of pressure sensor 5 points between 0 and 10/16 bar | 3200 0004 | |||
Precision differential pressure sensor for further measuring, ranges, e. g. 0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar |
on request | |||
Temperature sensors | ||||
31 | Order no. | |||
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm, d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments |
0604 0200 | |||
Screw-in temperature probe PT 100 class A, length: 300 mm, d=6mm, with integrated transducer 4…20 mA = -50°C…+500°C (2-wire) |
0604 0201 | |||
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments | 0604 0202 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 300 mm, d=6 mm, -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0205 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0206 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0207 | |||
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100 class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends |
0604 0208 | |||
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar material: stainless steel, temperature range: max. +260°C |
0554 0200 | |||
Clamp screwing 6mm; G 1/2" stainless steel clamp ring pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C |
0554 0201 | |||
Connection cables for pressure/temperature sensors | ||||
32 | Order no. | |||
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU / open ends, 5 m |
0553 0501 | |||
Connection cable for pressure, temperature, or external sensors on mobile instruments, ODU / open ends, 10 m |
0553 0502 | |||
Extension cable for mobile instruments ODU/ODU, 10m | 0553 0504 | |||
Mounted Odu plug for connection on mobile instruments | Z604 0104 | |||
Clamp-on meters | ||||
32 | Order no. | |||
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin | 0554 0511 | |||
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC, 3 m connection cable with ODU-plug (8 poles) for mobile devices |
0554 0519 | |||
Calibration certificate for clamp-on ammeters, 5 calibration points | 0554 3333 | |||
Current/effective power meter up to 32 A | ||||
Order no. | ||||
CS PM 532 | ||||
Current/effective power meter up to 32 A in a carrying case | 0554 5340 | |||
CS PM 600 Current/effective power meter | ||||
32 | Order no. | |||
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m | 0554 5341 | |||
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m | 0554 5342 | |||
Current transformer 100A/1A consisting of 3 transformers for mobile devices | Z554 0001 | |||
Current transformer 600A/1A consisting of 3 transformers for mobile devices | Z554 0002 | |||
Current transformer 1000A/1A consisting of 3 transformers for mobile devices | Z554 0003 | |||
Portable dew point meter DP 500 | ||||
Catalogue page 41 | Order no. | |||
Set DP 500 in a case - consisting of: | 0600 0500 | |||
Portable dew point meter DP 500 for compressed air and gases | 0560 0500 | |||
Mobile measuring chamber up to 16 bar | 0699 4490 | |||
Diffusion-tight teflon hose 1 m with fast coupling at both ends | 0554 0003 | |||
Power supply for DP 500/510 | 0554 0009 | |||
Control and calibration set 11.3% RH | 0554 0002 | |||
Quick-lock coupling | 0530 1101 | |||
Dry container for CS dew point sensors | 0699 2500 | |||
Transportation case (small) for DP 500 | 0554 6500 | |||
Further options, not included in the set | ||||
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet |
0554 7040 | |||
Portable dew point meter DP 500 (high pressure version up to 350 bar) | 0560 0501 | |||
High-pressure measuring chamber up to 350 bar | 0699 3590 | |||
Measuring chamber for atmospheric dew point | 0699 3690 | |||
Measuring chamber for granulate dryers for minimum over pressure | 0699 3490 | |||
Control and calibration set 33 % RH | 0554 0004 | |||
Control and calibration set 75.3 % RH | 0554 0005 | |||
Additional calibration point freely selectable in the range between -80…+20°Ctd | 0700 7710 | |||
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate | 0699 3396 | |||
Portable dew point meter DP 510 with external sensor input | ||||
Catalogue page 44 | Order no. | |||
Set DP 510 in a case - consisting of: | 0600 0510 | |||
Portable dew point meter DP 510 with one additional sensor input | 0560 0510 | |||
Mobile measuring chamber up to 16 bar | 0699 4490 | |||
Diffusion-tight teflon hose 1 m with fast coupling at both ends | 0554 0003 | |||
Power supply for DP 500/510 | 0554 0009 | |||
Control and calibration set 11.3% RH | 0554 0002 | |||
Quick-lock coupling | 0530 1101 | |||
Dry container for CS dew point sensors | 0699 2500 | |||
Transportation case (big) for DP 510 as well as further sensors | 0554 6510 | |||
Further options, not included in the set | ||||
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet | 0554 7040 | |||
Option for DP 510: “mathematics calculat. function” for 4 freely selectable “virtual” channels | Z500 5107 | |||
Option for DP 510: "Totalizer function for analogue signals" | Z500 5106 | |||
Portable dew point meter DP 510 for compressed air and gases (high pressure version up to 350 bar) |
0560 0512 | |||
High-pressure measuring chamber up to 350 bar | 0699 3590 | |||
Measuring chamber for atmospheric dew point | 0699 3690 | |||
Measuring chamber for granulate dryers for minimum over pressure | 0699 3490 | |||
Control and calibration set 33 % RH | 0554 0004 | |||
Control and calibration set 75.3 % RH | 0554 0005 | |||
Additional calibration point freely selectable in the range between -80…+20°Ctd | 0700 7710 | |||
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate | 0699 3396 | |||
Mounted Odu plug for connection on mobile instruments | Z604 0104 | |||
Flow sensor VA 500 | ||||
Catalogue page 45 | Order no. | |||
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl. 5 m cable to mobile instruments |
0695 1124 | |||
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm incl. 5 m cable to mobile instruments |
0695 1125 | |||
Sensor length 120 mm | ZSL 0120 | |||
Sensor length 160 mm | ZSL 0160 | |||
Sensor length 220 mm | ZSL 0220 | |||
Sensor length 300 mm | ZSL 0300 | |||
Sensor length 400 mm | ZSL 0400 | |||
Sensor length 500 mm | ZSL 0500 | |||
Sensor length 600 mm | ZSL 0600 | |||
Sensor length 700 mm | ZSL 0700 | |||
Ball valve I/I G 1/2" stainless steel | 3300 0002 | |||
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 | 3300 0006 | |||
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 | 3300 0007 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
Oil and fat free, special cleaning | 0699 4005 | |||
5 point precision calibration with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
Flow sensor VA 520 with integrated measuring section | ||||
45 | Order no. | |||
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 | 0695 0520 | |||
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 | 0695 0521 | |||
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 | 0695 0522 | |||
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 | 0695 0523 | |||
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 | 0695 0526 | |||
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 | 0695 0524 | |||
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 | 0695 0525 | |||
Flow measurment VA 500/ VA 520 for below gases | ||||
Order no. | ||||
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane | on request | |||
Dew point sensors FA 510 | ||||
45 | Order no. | |||
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd incl. mobile measuring chamber, 5 m cable and perforated cap |
0699 1510 | |||
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd incl. mobile measuring chamber, 5 m cable and perforated cap |
0699 1512 | |||
Connection cables for VA/FA sensors | ||||
45 | Order no. | |||
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m | 0553 1503 | |||
Extension cable for mobile instruments ODU/ODU, 10m | 0553 0504 | |||
Calibration certificates for flow sensors / dew point sensors | ||||
45 | Order no. | |||
5 point precision calibration for consumption sensors including ISO certificate | 3200 0001 | |||
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate | 0699 3396 | |||
Pressure sensors | ||||
Catalogue page 45 | Order no. | |||
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale | 0694 1886 | |||
Precision pressure sensor CS 16, accuracy ± 0.5 % | 0694 3555 | |||
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale | 0694 0356 | |||
Precision Pressure sensor CS 40, accuracy ± 0.5 % | 0694 3930 | |||
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale | 0694 3550 | |||
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale | 0694 3556 | |||
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale | 0694 3554 | |||
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale | 0694 3557 | |||
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale | 0694 3558 | |||
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale | 0694 3559 | |||
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale | 0694 3553 | |||
Precision differential pressure sensor CS 0…400 mbar differential pressure, accuracy: 0.075 % of full scale, static pressure max. 40 bar |
0694 3560 | |||
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % | 0694 3549 | |||
Calibration of pressure sensor 5 points between 0 and 10/16 bar | 3200 0004 | |||
Precision differential pressure sensor for further measuring, ranges, e. g. 0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar |
on request | |||
Temperature sensors | ||||
45 | Order no. | |||
Bendable temperature probe PT 100 (2-wire) class A, length: 300 mm, d=3 mm, -70°C to +500°C, connection cable PFA, 2 m with ODU-plug (8 pole) to mobile instruments |
0604 0200 | |||
Screw-in temperature probe PT 100 class A, length: 300 mm, d=6mm, with integrated transducer 4…20 mA = -50°C…+500°C (2-wire) |
0604 0201 | |||
Cross-band surface temperature probe, thermocouple Type K, with integrated transducer 4…20 mA = 0°C…+180°C, 2 m connection calbe (PVC) with ODU-plug (8-pole) to mobile instruments | 0604 0202 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 300 mm, d=6 mm, -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0205 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0206 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0207 | |||
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100 class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends |
0604 0208 | |||
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar material: stainless steel, temperature range: max. +260°C |
0554 0200 | |||
Clamp screwing 6mm; G 1/2" stainless steel clamp ring pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C |
0554 0201 | |||
Connection cables for pressure/temperature sensors | ||||
45 | Order no. | |||
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU / open ends, 5 m |
0553 0501 | |||
Connection cable for pressure, temperature, or external sensors on mobile instruments, ODU / open ends, 10 m |
0553 0502 | |||
Extension cable for mobile instruments ODU/ODU, 10m | 0553 0504 | |||
Mounted Odu plug for connection on mobile instruments | Z604 0104 | |||
Clamp-on meters | ||||
45 | Order no. | |||
Clamp-on ammeter 0...400 A 10-30 VDC for mobile devices, 3 m cable,ODU 8 pin | 0554 0511 | |||
Clamp-on ammeter 10…1000 A RMS, 4…20 mA = 10…1000 A, 10-30 VDC, 3 m connection cable with ODU-plug (8 poles) for mobile devices |
0554 0519 | |||
Calibration certificate for clamp-on ammeters, 5 calibration points | 0554 3333 | |||
Current/effective power meter up to 32 A | ||||
Order no. | ||||
CS PM 532 | ||||
Current/effective power meter up to 32 A in a carrying case | 0554 5340 | |||
CS PM 600 Current/effective power meter | ||||
45 | Order no. | |||
Current/effective power meter up to 100 A in a carrying case with connection cable 5 m | 0554 5341 | |||
Current/effective power meter up to 600 A in a carrying case with connection cable 5 m | 0554 5342 | |||
Current transformer 100A/1A consisting of 3 transformers for mobile devices | Z554 0001 | |||
Current transformer 600A/1A consisting of 3 transformers for mobile devices | Z554 0002 | |||
Current transformer 1000A/1A consisting of 3 transformers for mobile devices | Z554 0003 | |||
DP 400 mobile with integrated dew point and pressure measurement | ||||
Catalogue page 47 | Order no. | |||
DP 400 mobile - Portable dew point meter with integrated pressure measurement, incl. transportation bag for teflon hose and power supply |
0500 4505 | |||
Options: | ||||
Option: Integrated data logger for 100 million measured values | Z500 4002 | |||
Option: Integrated Ethernet- and RS 485 interface | Z500 4004 | |||
Option: Integrated webserver | Z500 4005 | |||
Option: “mathematics calculat. function” for 4 freely selectable “virtual” channels | Z500 4007 | |||
Option: 2 additional sensor inputs for external sensors (1 x digital sensor Modbus, 1 x analogue sensor) |
Z500 4001 | |||
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet |
0554 7040 | |||
Connection cables: | ||||
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m | 0553 1503 | |||
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU / open ends, 5 m |
0553 0501 | |||
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU / open ends, 10 m |
0553 0502 | |||
Extension cable for mobile instruments ODU/ODU, 10m | 0553 0504 | |||
Dew point sensors FA 510/515 for desiccant driers | ||||
Catalogue page 50 | Order no. | |||
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface | 0699 0510 | |||
FA 515 dew point sensor for desiccat driers incl. inspection certificate, 4…20 mA output signal (2-wire connection) or Modbus-RTU interface | 0699 0515 | |||
Additional costs FA 510, FA 515 dew point sensors: | ||||
Measuring ranges: | ||||
-80…+20°Ctd (-112 to 68°F) | ||||
-80...+20°Ctd (output scaling 4...20 mA = -100…+20°Ctd) | ||||
-80…+20°Ctd (output scaling 4…20 mA = -110…+20°Ctd) | ||||
Analogue output: | ||||
4…20 mA (3-Draht) | ||||
Special version 2…10 Volt | Z699 0510 | |||
Scaling: | ||||
Standard | ||||
Special scaling: 4…20 mA=__ … __ g/m³, ppm etc. | Z699 0514 | |||
Connector plug: | ||||
M12 plug | ||||
M12 plug (90°) angled | ||||
Max. pressure: | ||||
50 bar | ||||
350 bar | Z699 0515 | |||
Surface condition: | ||||
Normal | ||||
Free of oil & grease | Z699 0517 | |||
Connection cables: | ||||
Connection cable for VA/FA, 5 m with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m with M12 plug | 0553 0120 | |||
Connection cable for VA/FA sensors, 5 m with 90° offset M12 plug | 0553 0118 | |||
Connection cable for VA/FA sensors, 10 m with 90° offset M12 plug | 0553 0119 | |||
Connection cable for VA/FA, 5 m shielded | 0553 0129 | |||
Connection cable for VA/FA, 10 m shielded | 0553 0130 | |||
Measuring chambers: | ||||
Standard measuring chamber up to 16 bar | 0699 3390 | |||
Measuring chamber for atmospheric dew point | 0699 3690 | |||
High pressure measuring chamber up to 350 bar | 0699 3590 | |||
Measuring Chamber for granulate dryers up to 250 mbar | 0699 3490 | |||
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread | 0699 3290 | |||
Quick-lock coupling NW 7,2 sealing tape | 0530 1101 | |||
50 | CS Service software incl. PC connection set for FA/VA 5xx sensors | 0554 2007 | ||
Mains units: | ||||
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx, 100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A |
0554 0110 | |||
Transformer 100-240 V AC/24 V DC , 0,35 A on top-hat rail | 0699 3340 | |||
Calibration and adjustment: | ||||
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate | 0699 3396 | |||
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable | 0700 7710 | |||
Replacement unit for the period of re-calibration | 0699 3900 | |||
Dew point meter in exchange with calibration certificate at -40° Ctd | 0699 3990 | |||
Control and calibration set 11.3% RH | 0554 0002 | |||
Control and calibration set 33 % RH | 0554 0004 | |||
Control and calibration set 75,3 % RH | 0554 0005 | |||
Dew point set DS 52 for desiccant driers | ||||
Catalogue page 51 | Order no. | |||
Dew point set DS 52 for desiccant driers | 0600 5100 | |||
consisting of: | ||||
DS 52 LED display in wall housing | 0500 0009 | |||
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface | 0699 0510 | |||
Standard measuring chamber up to 16 bar | 0699 3390 | |||
Connection cable for VA/FA, 5 m with M12 plug | 0553 0104 | |||
Options: | ||||
Power supply 24 VDC (instead of 230 VAC) | Z500 0001 | |||
Power supply 110 VAC (instead of 230 VAC) | Z500 0002 | |||
Alarm unit mounted at wall housing | Z500 0003 | |||
Alarm unit for external mounting with 5 m cable | Z500 0004 | |||
Connecting cable version Switzerland - three-pole | Z553.CH | |||
Connecting cable version USA - three-pole | Z553.USA | |||
Calibration and adjustment: | ||||
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate | 0699 3396 | |||
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable | 0700 7710 | |||
Control and calibration set 11.3% RH | 0554 0002 | |||
Control and calibration set 33 % RH | 0554 0004 | |||
Control and calibration set 75,3 % RH | 0554 0005 | |||
Dew point sensors FA 510/515 for refrigeration driers | ||||
Catalogue page 52 | Order no. | |||
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface | 0699 0512 | |||
FA 515 dew point sensor for refrigeration driers incl. inspection certificate, 4…20 mA output signal (2-wire connection) or Modbus-RTU interface | 0699 0517 | |||
Additional costs FA 510, FA 515 dew point sensors: | ||||
Measuring ranges: | ||||
-20…+50°Ctd (-4 to 122 °F) | ||||
-40…+30°Ctd (-40 to 86°F) | on request | |||
-45…+70°Ctd (-49 to 158 °F) | on request | |||
-60…+30°Ctd (-76 to 86°F) | on request | |||
Analogue output: | ||||
4…20 mA (3-Draht) | ||||
Special version 2…10 Volt | Z699 0510 | |||
Scaling: | ||||
Standard | ||||
Special scaling: 4…20 mA=__ … __ g/m³, ppm etc. | Z699 0514 | |||
Connector plug: | ||||
M12 plug | ||||
M12 plug (90°) angled | ||||
Max. pressure: | ||||
50 bar | ||||
350 bar | Z699 0515 | |||
Surface condition: | ||||
Normal | ||||
Free of oil & grease | Z699 0517 | |||
Connection cables: | ||||
Connection cable for VA/FA, 5 m with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m with M12 plug | 0553 0120 | |||
Connection cable for VA/FA sensors, 5 m with 90° offset M12 plug | 0553 0118 | |||
Connection cable for VA/FA sensors, 10 m with 90° offset M12 plug | 0553 0119 | |||
Connection cable for VA/FA, 5 m shielded | 0553 0129 | |||
Connection cable for VA/FA, 10 m shielded | 0553 0130 | |||
Measuring chambers: | ||||
Standard measuring chamber up to 16 bar | 0699 3390 | |||
Measuring chamber for atmospheric dew point | 0699 3690 | |||
High pressure measuring chamber up to 350 bar | 0699 3590 | |||
Measuring Chamber for granulate dryers up to 250 mbar | 0699 3490 | |||
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread | 0699 3290 | |||
52 | Quick-lock coupling NW 7,2 sealing tape | 0530 1101 | ||
CS Service software incl. PC connection set for FA/VA 5xx sensors | 0554 2007 | |||
Mains units: | ||||
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx, 100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A |
0554 0110 | |||
Transformer 100-240 V AC/24 V DC , 0,35 A on top-hat rail | 0699 3340 | |||
Calibration and adjustment: | ||||
Precision calibration at 3°Ctd including ISO certificate | 0699 3396 | |||
Precision calibration in the range of -20 to 50°Ctd, one additional point, freely selectable | 0700 7710 | |||
Replacement unit for the period of re-calibration | 0699 3900 | |||
Dew point meter in exchange with calibration certificate at -40° Ctd | 0699 3990 | |||
Control and calibration set 11.3% RH | 0554 0002 | |||
Control and calibration set 33 % RH | 0554 0004 | |||
Control and calibration set 75,3 % RH | 0554 0005 | |||
Dew point set DS 52 for refrigeration driers | ||||
Catalogue page 53 | Order no. | |||
Dew point set DS 52 for refrigeration driers | 0600 5120 | |||
consisting of: | ||||
DS 52 LED display in wall housing | 0500 0009 | |||
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface | 0699 0512 | |||
Standard measuring chamber up to 16 bar | 0699 3390 | |||
Connection cable for VA/FA, 5 m with M12 plug | 0553 0104 | |||
Options: | ||||
Power supply 24 VDC (instead of 230 VAC) | Z500 0001 | |||
Power supply 110 VAC (instead of 230 VAC) | Z500 0002 | |||
Alarm unit mounted at wall housing | Z500 0003 | |||
Alarm unit for external mounting with 5 m cable | Z500 0004 | |||
Connecting cable version Switzerland - three-pole | Z553.CH | |||
Connecting cable version USA - three-pole | Z553.USA | |||
Calibration and adjustment: | ||||
Precision calibration at 3°Ctd including ISO certificate | 0699 3396 | |||
Precision calibration in the range of -20 to 50°Ctd, one additional point, freely selectable | 0700 7710 | |||
Control and calibration set 11.3% RH | 0554 0002 | |||
Control and calibration set 33 % RH | 0554 0004 | |||
Control and calibration set 75,3 % RH | 0554 0005 | |||
Dew point set DS 400 | ||||
Catalogue page 54 | Order no. | |||
Dew point set DS 400 for desiccant driers (-80…+20°Ctd) | 0601 0510 | |||
consisting of: | ||||
Chart recorder DS 400 | 0500 4000 | |||
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface (-80…+20°Ctd) | 0699 0510 | |||
Standard measuring chamber up to 16 bar | 0699 3390 | |||
Connection cable for VA/FA, 5 m with M12 plug | 0553 0104 | |||
Dew point set DS 400 for refrigeration driers (-20…+50°Ctd) | 0601 0512 | |||
consisting of: | ||||
Chart recorder DS 400 | 0500 4000 | |||
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface (-20…+50°Ctd) | 0699 0512 | |||
Standard measuring chamber up to 16 bar | 0699 3390 | |||
Connection cable for VA/FA, 5 m with M12 plug | 0553 0104 | |||
Optionen: | ||||
Integrated data logger for 100 million measured values | Z500 4002 | |||
Integrierte Ethernet- und RS 485 Schnittstelle | Z500 4004 | |||
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...) | Z500 4001 | |||
2 additional sensor inputs for digital sensors (SDI/Modbus) | Z500 4003 | |||
Integrated Webserver | Z500 4005 | |||
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet |
0554 7040 | |||
Alarm device assembled | Z500 0003 | |||
Alarm device for external assembly incl. 5 m cable | Z500 0004 | |||
Calibration and adjustment: | ||||
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate | 0699 3396 | |||
DS 400 - Chart recorder | ||||
Catalogue page 56 | Order no. | |||
Product | sensor- input 1+2 |
sensor- input 3+4 |
||
Chart recorder DS400 - with 3.5“ graphic display - easy operation with touch screen | digital | ---------- | 0500 4000 D | |
digital | digital | 0500 4000 DD | ||
digital | analogue | 0500 4000 DA | ||
analogue | ---------- | 0500 4000 A | ||
analogue | analogue | 0500 4000 AA | ||
Options: | ||||
Integrated data logger for 100 Mio. measured values | Z500 4002 | |||
Integrated Ethernet- and RS 485 interface | Z500 4004 | |||
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...) | Z500 4001 | |||
2 additional sensor inputs for digital sensors (SDI/Modbus) | Z500 4003 | |||
External Gateway PROFIBUS for RS 485 interface connection | Z500 3008 | |||
External Gateway PROFINET for RS 485 interface connection | Z500 3009 | |||
Option Integrated Webserver DS400 | Z500 4005 | |||
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels | Z500 4007 | |||
Option "Totalizer function for analogue signals" | Z500 4006 | |||
Further options: | ||||
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet |
0554 7040 | |||
CS Soft Network - Database Client/Server Solution (up to 5 DS 400) - database (MySQL) to Server - data evaluation via Client-Software | 0554 7041 | |||
CS Soft Network - Database Client/Server Solution (up to 10 DS 400) - data base (MySQL) to server - data evaluation via Client-Software | 0554 7042 | |||
CS Soft Network - Database Client/Server Solution (up to 20 DS 400) - data base (MySQL) to server - data evaluation via Client-Software | 0554 7043 | |||
CS Soft Network - Database Client/Server Solution (> 20 DS 400) - data base (MySQL) to server - data evaluation via Client-Software | 0554 7044 | |||
Software Support / h | 9999 9998 | |||
Ready for plug in and parametrization | 0990 0010 | |||
Everything ready for plug in | 0990 0011 | |||
Flow sensor VA 500 | ||||
Catalogue page 57 | Order no. | |||
VA 500 flow sensor, with RS 485 interface (Modbus-RTU), with analogue output 4...20mA and pulse output (galvanically separated) | 0695 5001 | |||
Max. Version (185 m/s) | Z695 5003 | |||
HighSpeed version (224 m/s) | Z695 5002 | |||
Display | Z695 5000 | |||
M-Bus (pulse output not available) | Z695 5004 | |||
Sensor length 120 mm | ZSL 0120 | |||
Sensor length 160 mm | ZSL 0160 | |||
Sensor length 220 mm | ZSL 0220 | |||
Sensor length 300 mm | ZSL 0300 | |||
Sensor length 400 mm | ZSL 0400 | |||
Sensor length 500 mm | ZSL 0500 | |||
Sensor length 600 mm | ZSL 0600 | |||
Sensor length 700 mm | ZSL 0700 | |||
Ball valve I/I G 1/2" stainless steel | 3300 0002 | |||
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 | 3300 0006 | |||
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 | 3300 0007 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
Oil and fat free, special cleaning | 0699 4005 | |||
5 point precision calibration of new instrument with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
Flow sensor VA 520 with integrated measuring section | ||||
Catalogue page 57 | Order no. | |||
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 | 0695 0520 | |||
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 | 0695 0521 | |||
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 | 0695 0522 | |||
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 | 0695 0523 | |||
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 | 0695 0526 | |||
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 | 0695 0524 | |||
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 | 0695 0525 | |||
Option signal output / bus connection | ||||
M-Bus (pulse output not available) | Z695 5004 | |||
Connection cables: | ||||
Connection cable for VA/FA, 5 m, with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m, with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m, with M12 plug | 0553 0120 | |||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
Option: special cleaning | 0699 4005 | |||
57 | 5 point precision calibration with ISO certificate | 3200 0001 | ||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
Further accessories: | ||||
Closing cap for measuring section in aluminium | 0190 0001 | |||
Closing cap for measuring section stainless steel 1.4404 | 0190 0002 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
Flow measurment VA 500/ VA 520 for below gases | ||||
Order no. | ||||
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane | on request | |||
Dew point sensors FA 510 | ||||
57 | Order no. | |||
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface | 0699 0510 | |||
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface | 0699 0512 | |||
Measuring chamber with inner threat G1/2" and mounted male coupling DN 7,2 for quick-lock coupling |
0699 3390 | |||
More measuring chambers please see on catalogue page 60 | ||||
Connection cables for VA/FA sensors | ||||
57 | Order no. | |||
Connection cable for VA/FA, 5 m with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m with M12 plug | 0553 0120 | |||
Pressure sensors | ||||
Catalogue page 57 | Order no. | |||
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale | 0694 1886 | |||
Precision pressure sensor CS 16, accuracy ± 0.5 % | 0694 3555 | |||
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale | 0694 0356 | |||
Precision pressure sensor CS 40, accuracy ± 0.5 % | 0694 3930 | |||
Precision pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale | 0694 3550 | |||
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale | 0694 3556 | |||
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale | 0694 3554 | |||
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale | 0694 3557 | |||
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale | 0694 3558 | |||
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale | 0694 3559 | |||
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale | 0694 3553 | |||
Precision differential pressure sensor CS 0…400 mbar differential pressure, accuracy: 0.075 % of full scale, static pressure max. 40 bar |
0694 3560 | |||
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % | 0694 3549 | |||
Calibration of pressure sensor 5 points between 0 and 10/16 bar | 3200 0004 | |||
Precision differential pressure sensor for further measuring, ranges, e. g. 0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar |
on request | |||
Temperature sensors | ||||
57 | Order no. | |||
Screw-in temperature probe PT 100 class A, length: 300 mm, d=6mm, with integrated transducer 4…20 mA = -50°C…+500°C (2-wire) |
0604 0201 | |||
Outdoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm), temperature range: -50°C to +80°C |
0604 0203 | |||
Indoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm), temperature range: -50°C to +80°C |
0604 0204 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 300 mm, d=6 mm, -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0205 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0206 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0207 | |||
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100 class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends |
0604 0208 | |||
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar material: stainless steel, temperature range: max. +260°C |
0554 0200 | |||
Clamp screwing 6mm; G 1/2" stainless steel clamp ring pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C |
0554 0201 | |||
Connection cables for pressure/temperature sensors | ||||
57 | Order no. | |||
Connection cable for sensors 5 m, with open ends | 0553 0108 | |||
Connection cable for sensors 10 m, with open ends | 0553 0109 | |||
Clamp-on meters | ||||
57 | Order no. | |||
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends | 0554 0510 | |||
Clamp-on ammeter 0…1000 A RMS, 4…20 mA = 0…1000 A, 10-30 VDC, 3 m connection cable with open ends | 0554 0518 | |||
Calibration certificate for clamp-on ammeters, 5 calibration points | 0554 3333 | |||
CS ENERIUM 30 Current/effective power meter for panel mounting | ||||
Catalogue page 57 | Order no. | |||
CS ENERIUM 30 Current/effective power meter for panel mounting, with RS 485 Interface |
0554 5355 | |||
Current transformer 100/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm) |
0554 5344 | |||
Current transformer 200/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm) |
0554 5345 | |||
Current transformer 300/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5346 | |||
Current transformer 500/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5347 | |||
Current transformer 600/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5348 | |||
Current transformer 1000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 65 x 32 mm) |
0554 5349 | |||
Current transformer 2000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 127 x 38 mm) |
0554 5350 | |||
Connection cable CS ENERIUM 30: | ||||
Connection cable for sensors 5 m, with open ends | 0553 0108 | |||
Connection cable for sensors 10 m, with open ends | 0553 0109 | |||
Connection cable variable length, open ends on both sides | 0553 0126 | |||
FA 500 dew point monitoring | ||||
Catalogue page 61 | Order no. | |||
FA 500 dew point sensor for refrigeration driers, -20...50°Ctd | 0699 0501 | |||
FA 500 dew point sensor for desiccant driers, -80...20°Ctd | 0699 0502 | |||
FA 500 dew point sensor, -60...30°Ctd | 0699 0503 | |||
Options: | ||||
Ethernet-Interface for VA500/VA520, FA500 | Z695 5006 | |||
Ethernet-Interface PoE for VA500/VA520, FA500 | Z695 5007 | |||
M-Bus (pulse output not available) | Z695 5004 | |||
Option analogue output FA5xx, Special version 2…10 Volt | Z699 0510 | |||
Option max. pressure FA5xx 350 bar | Z699 0515 | |||
Option max. pressure FA5xx 500 bar | Z699 0516 | |||
Option special scaling FA5xx 4…20 mA=__ … __ g/m³, ppm etc. | Z699 0514 | |||
Option connection thread FA5xx, 5/8" UNF | Z699 0511 | |||
Option connection thread FA5xx, 1/2" NPT | Z699 0512 | |||
Option surface condition FA5xx, free of oil & grease | Z699 0517 | |||
Connection cables: | ||||
Connection cable for VA/FA, 5 m, with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m, with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m, with M12 plug | 0553 0120 | |||
Connection cable for VA/FA, 5 m shielded | 0553 0129 | |||
Connection cable for VA/FA, 10 m shielded | 0553 0130 | |||
Connection cable for VA/FA sensors, 5 m with 90° offset M12 plug | 0553 0118 | |||
Connection cable for VA/FA sensors, 10 m with 90° offset M12 plug | 0553 0119 | |||
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 5 m | 0553 0106 | |||
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 10 m | 0553 0107 | |||
Measuring chambers: | ||||
Standard measuring chamber up to 16 bar | 0699 3390 | |||
Measuring chamber for atmospheric dew point | 0699 3690 | |||
High pressure measuring chamber up to 350 bar | 0699 3590 | |||
Measuring Chamber for granulate dryers up to 250 mbar | 0699 3490 | |||
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread | 0699 3290 | |||
Quick-lock coupling NW 7,2 sealing tape | 0530 1101 | |||
CS Service software incl. PC connection set for FA/VA 5xx sensors | 0554 2007 | |||
Power supply: | ||||
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx, 100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A |
0554 0110 | |||
Transformer 100-240 V AC/24 V DC , 0,35 A on top-hat rail | 0699 3340 | |||
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 | 0554 0109 | |||
Calibration and adjustment: | ||||
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate | 0699 3396 | |||
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable | 0700 7710 | |||
Control and calibration set 11.3% RH | 0554 0002 | |||
Control and calibration set 33 % RH | 0554 0004 | |||
Control and calibration set 75,3 % RH | 0554 0005 | |||
FA 515 Ex Dew point measurement in explosive areas | ||||
Catalogue page 62 | Order no. | |||
FA 515 Ex pressure dew point meter (-80 to 20°Ctd) | 0699 5515 | |||
Options: | ||||
Special scaling, Analogue output to other humidity parameters: % RH g/m3, mg/m3, ppm V/V, g/kg |
Z699 0514 | |||
Intrinsically safe power supply, safety barriers | 0554 3071 | |||
High pressure measuring chamber up to 350 bar | 0699 3590 | |||
Mains units: | ||||
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx, 100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A |
0554 0110 | |||
Mains unit on DIN rail, 100-240 VAC / 24 VDC, 0.35 A | 0699 3340 | |||
Mains unit 100-240 VAC/24 VDC, 0.35 A for Series VA/FA 400, 2 m cable | 0554 0107 | |||
Measuring chambers | ||||
63 | Order no. | |||
Standard measuring chamber up to 16 bar | 0699 3390 | |||
Measuring chamber for atmospheric dew point | 0699 3690 | |||
High pressure measuring chamber up to 350 bar | 0699 3590 | |||
Measuring chamber for granulate dryers for minimum over pressure | 0699 3490 | |||
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread | 0699 3290 | |||
Calibration and adjustments of new devices | ||||
64 | Order no. | |||
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate | 0699 3396 | |||
Precision calibration in the range of -80 to 20°Ctd, one additional point, freely selectable | 0700 7710 | |||
Control and calibration set 11.3% RH | 0554 0002 | |||
Control and calibration set 33 % RH | 0554 0004 | |||
Control and calibration set 75,3 % RH | 0554 0005 | |||
Re-calibration (not discountable) | ||||
64 | Order no. | |||
Precision re-calibration at -40°C dew point with ISO certificate | 0699 3333 | |||
Precision calibration in the range of -80 to 20° Ctd, one additional point, freely selectable | 0700 7710 | |||
Replacement unit for the period of re-calibration | 0699 3900 | |||
Dew point meter in exchange with calibration certificate at -40° Ctd | 0699 3990 | |||
VA 550 Flow sensor | ||||
Catalogue page 79 + 80 | Order no. | |||
VA 550 Flow sensor, measuring head in robust aluminium die cast housing | 0695 0550 | |||
Measuring range: | Bestell-Code | |||
A1 - Standard version (92,7 m/s) | A1 | |||
A2 - Max version (185 m/s) | A2 | |||
A3 - High-Speed version (224 m/s) | A3 | |||
Screw-in thread: | ||||
B1 - G 1/2" outer thread | B1 | |||
B2 - NPT 1/2" outer thread | B2 | |||
B3 - PT 1/2" outer thread | B3 | |||
Mounting length / shaft length: | ||||
C1 - 220 mm | C1 | |||
C2 - 300 mm | C2 | |||
C3 - 400 mm | C3 | |||
C4 - 500 mm | C4 | |||
C5 - 600 mm | C5 | |||
C7 - 160 mm | C7 | |||
Option display: | ||||
D1 - with integrated display | D1 | |||
D2 - without display | D2 | |||
Option signal outputs / bus connection: | ||||
E1 - 2x4...20mA a. output,galv.isolated,pulse output RS485 Modbus-RTU | E1 | |||
E4 - 1x4…20mA analogue output (not galv. isolated), pulse output, RS 485 (Modbus RTU) | E4 | |||
E5 - Ethernet-Interface (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) | E5 | |||
E7 - 2x4..20mA analogue output passive,pulse output RS485 (Mb-RTU) | E7 | |||
Catalogue page 79 + 80 | E8 - M-Bus (Z6955504) | E8 | ||
E9 - Ethernet-Interface PoE (Power over Ethernet) (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) | E9 | |||
Calibration: | ||||
F1 - no real gas calibration - gas adjustment via gas constant | F1 | |||
F2 - real gas calibration in the gas type as selected below | F2 | |||
Gas type: | ||||
G1 - Compressed air | G1 | |||
G2 - Nitrogen (N2) | G2 | |||
G3 - Argon (Ar) | G3 | |||
G4 - Carbon dioxide (CO2) | G4 | |||
G5 - Oxygen (O2) | G5 | |||
G6 - Nitrous Oxide (N2O) | G6 | |||
G7 - Natural gas (NG) | G7 | |||
G8 - Helium (He) - Real gas calibration required | G8 | |||
G9 - Propane (C3H8) - Real gas calibration required | G9 | |||
G10 - Methane (CH4) | G10 | |||
G11 - Biogas (Methane 50% : CO2 50%) | G11 | |||
G12 - Hydrogen (H2) - Real gas calibration required | G12 | |||
G90 -Further gas | G90 | |||
G91 - Gas mixture | G91 | |||
Maximum pressure: | ||||
H3 - 16 bar | H3 | |||
H1 - 50 bar (not for DVGW approval) | H1 | |||
H2 - 100 bar (not for DVGW approval) | H2 | |||
Surface condition: | ||||
I1 - Standard version | I1 | |||
I2 - Special cleaning - oil and grease free (e.g. for oxygen) | I2 | |||
I3 - LABS free and silicone free, special cleaning oil and grease free | I3 | |||
Accuracy class: | ||||
J1 - ± 1,5% of measured value (standard) | J1 | |||
J2 - ± 1 % of measured value (precision) | J2 | |||
Maximum gas temperature at the sensor tip: | ||||
K1 - up to 120°C gas temperature (only for ATEX - version) | K1 | |||
K2 - up to 180°C gas temperature (not for ATEX - version) | K2 | |||
Approvals: | ||||
L1 - Non-explosive area - no approval | L1 | |||
L2 - ATEX II 2G Ex d IIC T4 | L2 | |||
79 + 80 | L3 - DVGW approval (for natural gas) | L3 | ||
Reference conditions: | ||||
M1 - 20°C, 1000 hPa | M1 | |||
M2 - 0°C, 1013,25 hPa | M2 | |||
M3 - 15°C, 981 hPa | M3 | |||
M4 - 15°C, 1013,25 hPa | M4 | |||
R1 - Special measuring range | R1 | |||
Further accessories: | ||||
Connection cable for sensors 5 m with open ends | 0553 0108 | |||
Connection cable for sensors 10 m with open ends | 0553 0109 | |||
Ethernet connection cable length 5 m, M12 plug x-coded (8 poles) to RJ 45 plug | 0553 2503 | |||
Ethernet connection cable length 10 m, M12 plug x-coded (8 poles) to RJ 45 plug | 0553 2504 | |||
5 point precision calibration of new instrument with ISO certificate | 3200 0001 | |||
Additional calibration point volume flow VA5xx serial, freely selectable | 0700 7720 | |||
CS Service software incl. PC connection set for FA/VA 5xx sensors | 0554 2007 | |||
High-pressure protection f. installation from 10 to 100 bar (for VA 550) | 0530 1115 | |||
High-pressure protection f. installation from 10 to 16 bar DVGW (for VA 550) | 0530 1116 | |||
PNG cable screwing - standard | 0553 0552 | |||
PNG cable screwing – for ATEX | 0553 0551 | |||
VA 570 - Flow sensor with integrated measuring section | ||||
Catalogue page 78 + 80 | Order no. | |||
VA 570 Flow sensor with integrated 1/2" measuring section | 0695 0570 | |||
VA 570 Flow sensor with integrated 3/4" measuring section | 0695 0571 | |||
VA 570 Flow sensor with integrated 1" measuring section | 0695 0572 | |||
VA 570 Flow sensor with integrated 1 1/4" measuring section | 0695 0573 | |||
VA 570 Flow sensor with integrated 1 1/2" measuring section | 0695 0574 | |||
VA 570 Flow sensor with integrated 2" measuring section | 0695 0575 | |||
VA 570 Flow sensor with integrated DN 15 measuring section with weld neck flange | 0695 2570 | |||
VA 570 Flow sensor with integrated DN 20 measuring section with weld neck flange | 0695 2571 | |||
VA 570 Flow sensor with integrated DN 25 measuring section with weld neck flange | 0695 2572 | |||
VA 570 Flow sensor with integrated DN 32 measuring section with weld neck flange | 0695 2573 | |||
VA 570 Flow sensor with integrated DN 40 measuring section with weld neck flange | 0695 2574 | |||
VA 570 Flow sensor with integrated DN 50 measuring section with weld neck flange | 0695 2575 | |||
VA 570 Flow sensor with integrated DN 65 measuring section with weld neck flange | 0695 2576 | |||
VA 570 Flow sensor with integrated DN 80 measuring section with weld neck flange | 0695 2577 | |||
Outer thread measuring section: | Bestell-Code | |||
A2 - NPT outer thread | A2 | |||
Option display: | ||||
B1 - with integrated display | B1 | |||
B2 - without display | B2 | |||
78 + 80 | Option signal outputs / bus connection: | |||
C1 - 2x4...20mA analogue output galv. isolated, pulse output RS485 | C1 | |||
C4 - 1x4…20mA analogue output (not galv. isolated), pulse output, RS 485 (Modbus RTU) | C4 | |||
C5 - Ethernet-Interface (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) | C5 | |||
C7 - 2x4..20mA analogue output passive, pulse outp.RS485 (Mb-RTU) | C7 | |||
C8 - E8 - M-Bus (Z6955504) | C8 | |||
C9 - Ethernet-Interface PoE (Power over Ethernet) (Modbus/TCP), 1 x 4…20 mA analogue output (not galvanically isolated), pulse output, RS 485 (Modbus-RTU) | C9 | |||
Calibration: | ||||
D1 - no real gas calibration - gas adjustment via gas constant | D1 | |||
D2 - real gas calibration in the selected gas type | D2 | |||
Gas type: | ||||
E1 - compressed air | E1 | |||
E2 - Nitrogen (N2) | E2 | |||
E3 - Argon (Ar) | E3 | |||
E4 - Carbon dioxide (CO2) | E4 | |||
E5 - Oxygen (O2) | E5 | |||
E6 - Nitrous oxide (N2O) | E6 | |||
E7 - Natural gas (NG) | E7 | |||
E8 - Helium (He) - Real gas calibration required | E8 | |||
E9 - Propan (C3H8) - Real gas calibration required | E9 | |||
E10 - Methane (CH4) | E10 | |||
E11 - Biogas (Methane 50% : CO2 50%) | E11 | |||
E12 - Hydrogen (H2) - Real gas calibration required | E12 | |||
E90 - Further gas | E90 | |||
E91 - Gas mixture | E91 | |||
Reference conditions: | ||||
F1 - 20°C, 1000 hPa | F1 | |||
F2 - 0°C, 1013,25 hPa | F2 | |||
F3 - 15°C, 981 hPa | F3 | |||
F4 - 15°C, 1013,25 hPa | F4 | |||
Maximum pressure: | ||||
G1 - 16 bar (Standard) | G1 | |||
G2 - 40 bar (High pressure) - (not for DVGW approval) | G2 | |||
Surface condition: | ||||
H1 - Standard version | H1 | |||
H2 - Special cleaning - oil and grease free (e.g. for oxygen) | H2 | |||
H3 - LABS free and silicone free version, incl. oil and grease free | H3 | |||
78 +80 | Accuracy class: | |||
I1 - ± 1.5% of measured value (standard) | I1 | |||
I2 - ± 1 % of measured value (precision) | I2 | |||
Maximum gas temperature at the sensor tip: | ||||
J1 - up to 120°C gas temperature (only for ATEX - version) | J1 | |||
J2 - up to 180°C gas temperature (not for ATEX - version) | J2 | |||
Approvals: | ||||
K1 - Non-explosive area - no approval | K1 | |||
K2 - ATEX II 2G Ex d IIC T4 | K2 | |||
K3 - DVGW approval (for natural gas) | K3 | |||
R1 - Special measuring range | R1 | |||
Further accessories: | ||||
Connection cable for sensors 5 m with open ends | 0553 0108 | |||
Connection cable for sensors 10 m with open ends | 0553 0109 | |||
Ethernet connection cable length 5 m, M12 plug x-coded (8 poles) to RJ 45 plug | 0553 2503 | |||
Ethernet connection cable length 10 m, M12 plug x-coded (8 poles) to RJ 45 plug | 0553 2504 | |||
5 point precision calibration of new instrument with ISO certificate | 3200 0001 | |||
Additional calibration point volume flow VA5xx serial, freely selectable | 0700 7720 | |||
CS Service software incl. PC connection set for FA/VA 5xx sensors | 0554 2007 | |||
PNG cable screwing - standard | 0553 0552 | |||
PNG cable screwing – for ATEX | 0553 0551 | |||
VA 500 - Flow sensor for compressed air and gases | ||||
Catalogue page 83 | Order no. | |||
VA 500 flow sensor, with RS 485 interface (Modbus-RTU) with analogue output 4...20mA and pulse output (galvanically separated), standard version (92,7 m/s) | 0695 5001 | |||
Measuring range: | ||||
Max-version (185m/s) | Z695 5003 | |||
High-Speed-Version (224 m/s) | Z695 5002 | |||
Option display: | ||||
with integrated display | Z695 5000 | |||
without display | ||||
Option signal output / bus connection: | ||||
Standard | ||||
Ethernet-Interface for VA500/VA520, FA500 | Z695 5006 | |||
Ethernet-Interface PoE for VA500/VA520, FA500 | Z695 5007 | |||
M-Bus (pulse output not available) | Z695 5004 | |||
Catalogue page 83 | Mounting length / shaft length: | |||
220 mm | ZSL0220 | |||
120 mm | ZSL0120 | |||
160 mm | ZSL0160 | |||
300 mm | ZSL0300 | |||
400 mm | ZSL0400 | |||
500 mm | ZSL0500 | |||
600 mm | ZSL0600 | |||
700 mm | ZSL0700 | |||
Surface condition: | ||||
Special cleaning - oil and grease free (e.g. for oxygen) | 0699 4005 | |||
LABS free and silicone free version incl.cleaning oil and grease free | 0699 4007 | |||
Gas type: | ||||
Compressed air | ||||
Nitrogen (N2) | ||||
Argon (Ar) | ||||
Carbon dioxide (CO2) | ||||
Oxygen (O2) | ||||
Nitrous oxide (N2O) | ||||
Natural gas (NG) | ||||
Helium (He) - Real gas calibration required | ||||
Propane (C3H8) - Real gas calibration required | ||||
Methane (CH4) | ||||
Biogas (Methane 50% : CO2 50%) | ||||
Hydrogen (H2) - Real gas calibration required | ||||
Further gas | ||||
Gas mixture | ||||
Calibration: | ||||
Real gas calibration in the selected gas type | ||||
Special measuring range: | ||||
Special measuring range freely selectable | Z695 4006 | |||
Accuracy class: | ||||
± 1 % of measured value (precision) | Z695 5005 | |||
Further accessories: | ||||
Ball valve I/I G 1/2" stainless steel | 3300 0002 | |||
Welding neck, L = 35 mm male screw, R1/2",stainless steel 1.4301 | 3300 0006 | |||
Welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 | 3300 0007 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
Connection cables: | ||||
Connection cable for VA/FA, 5 m, with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m, with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m, with M12 plug | 0553 0120 | |||
Ethernet-connection cable length 5 m, M 12 plug x-coded (8 poles) to RJ45 | 0553 2503 | |||
Ethernet-connection cable length 10 m, M 12 plug x-coded (8 poles) to RJ45 | 0553 2504 | |||
83 | Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 5 m |
0553 0106 | ||
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 10 m |
0553 0107 | |||
CS Service software incl. PC connection set for FA/VA 5xx sensors | 0554 2007 | |||
Mains units: | ||||
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx, 100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A |
0554 0110 | |||
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 | 0554 0109 | |||
External display, chart recorder DS 400 | 0500 4000 | |||
Calibration and adjustment: | ||||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
5 point precision calibration of new instrument with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
VA 520 - Flow sensor with integrated measuring section - Screw-in thread |
||||
Catalogue page 87 | Stainless steel: 1,4301 | Order no. | ||
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 | 0695 0520 | |||
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 | 0695 0521 | |||
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 | 0695 0522 | |||
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 | 0695 0523 | |||
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 | 0695 0526 | |||
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 | 0695 0524 | |||
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 | 0695 0525 | |||
Stainless steel: 1,4571 | ||||
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4571 | 0695 1520 | |||
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4571 | 0695 1521 | |||
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4571 | 0695 1522 | |||
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4571 | 0695 1523 | |||
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4571 | 0695 1526 | |||
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4571 | 0695 1524 | |||
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4571 | 0695 1525 | |||
Outer thread measuring section of VA 520 with stainless steel 1,4571 | ||||
NPT outer thread | C2 | |||
Option signal output / bus connection: | ||||
Standard | ||||
Ethernet-Interface für VA500/VA520, FA500 | Z6955006 | |||
Ethernet-Interface PoE für VA500/VA520, FA500 | Z6955007 | |||
M-Bus (pulse output not available) | Z695 5004 | |||
Gas type: | ||||
Compressed air | ||||
Nitrogen (N2) | ||||
Argon (Ar) | ||||
Carbon dioxide (CO2) | ||||
Oxygen (O2) | ||||
Nitrous oxide (N2O) | ||||
Natural gas (NG) | ||||
Helium (He) - Real gas calibration required | ||||
Propane (C3H8) - Real gas calibration required | ||||
Methane (CH4) | ||||
Biogas (Methane 50% : CO2 50%) | ||||
Hydrogen (H2) - Real gas calibration required | ||||
Further gas | ||||
Gas mixture | ||||
Calibration: | ||||
Real gas calibration in the selected gas type | ||||
Catalogue page 87 | Maximum pressure: | |||
40 bar (High-pressure) | Z695 0411 | |||
Surface condition: | ||||
Special cleaning - oil and grease free (e.g. for oxygen) | 0699 4005 | |||
LABS free and silicone free version incl.cleaning oil and grease free | 0699 4007 | |||
Special measuring range: | ||||
Special measuring range freely selectable | Z695 4006 | |||
Accuracy class: | ||||
± 1 % of measured value (precision) | Z695 5005 | |||
Connection cables: | ||||
Connection cable for VA/FA, 5 m, with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m, with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m, with M12 plug | 0553 0120 | |||
Ethernet-connection cable length 5 m, M 12 plug x-coded (8 poles) RJ 45 plug | 0553 2503 | |||
Ethernet-connection cable length 10 m, M 12 plug x-coded (8 poles) RJ 45 plug | 0553 2504 | |||
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 5 m | 0553 0106 | |||
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 10 m | 0553 0107 | |||
CS Service software incl. PC connection set for FA/VA 5xx sensors | 0554 2007 | |||
Closing cap for measuring section in aluminium | 0190 0001 | |||
Closing cap for measuring section stainless steel 1.4404 | 0190 0002 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
Mains units: | ||||
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx, 100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A |
0554 0110 | |||
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 | 0554 0109 | |||
External display, chart recorder DS 400 | 0500 4000 | |||
Calibration and adjustment: | ||||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
5 point precision calibration of new instrument with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
VA 520 - Flow sensor with integrated measuring section - weld neck flange | ||||
Catalogue page 89 | Order no. | |||
VA520 Flow meter with integrated DN 15 measuring section with flange | 0695 2521 | |||
VA520 Flow meter with integrated DN 20 measuring section with flange | 0695 2522 | |||
VA520 Flow meter with integrated DN 25 measuring section with flange | 0695 2523 | |||
VA520 Flow meter with integrated DN 32 measuring section with flange | 0695 2526 | |||
VA520 Flow meter with integrated DN 40 measuring section with flange | 0695 2524 | |||
VA520 Flow meter with integrated DN 50 measuring section with flange | 0695 2525 | |||
VA520 Flow meter with integrated DN 65 measuring section with flange | 0695 2527 | |||
VA520 Flow meter with integrated DN 80 measuring section with flange | 0695 2528 | |||
Option signal output / bus connection: | ||||
Standard | ||||
Ethernet-Interface for VA500/VA520, FA500 | Z695 5006 | |||
Ethernet-Interface PoE for VA500/VA520, FA500 | Z695 5007 | |||
M-Bus (pulse output not available) | Z695 5004 | |||
Gas type: | ||||
Compressed air | ||||
Nitrogen (N2) | ||||
Argon (Ar) | ||||
Carbon dioxide (CO2) | ||||
Oxygen (O2) | ||||
Nitrous oxide (N2O) | ||||
Natural gas (NG) | ||||
Helium (He) - Real gas calibration required | ||||
Propane (C3H8) - Real gas calibration required | ||||
Methane (CH4) | ||||
Biogas (Methane 50% : CO2 50%) | ||||
Hydrogen (H2) - Real gas calibration required | ||||
Further gas | ||||
Gas mixture | ||||
Calibration: | ||||
Real gas calibration in the selected gas type | ||||
Maximum pressure: | ||||
40 bar (High-pressure) | Z695 0411 | |||
Surface condition: | ||||
Special cleaning - oil and grease free (e.g. for oxygen) | 0699 4005 | |||
LABS free and silicone free version incl.cleaning oil and grease free | 0699 4007 | |||
Special measuring range: | ||||
Special measuring range freely selectable | Z695 4006 | |||
Catalogue page 89 | Accuracy class: | |||
± 1 % of measured value (precision) | Z695 5005 | |||
Connection cables: | ||||
Connection cable for VA/FA, 5 m, with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m, with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m, with M12 plug | 0553 0120 | |||
Ethernet-connection cable length 5 m, M 12 plug x-coded (8 poles) to RJ 45 | 0553 2503 | |||
Ethernet-connection cable length 10 m, M 12 plug x-coded (8 poles) to RJ 45 | 0553 2504 | |||
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 5 m |
0553 0106 | |||
Cable for alarm-/pulse output for dew point sensors/ flow sensors with M12 plug, lenght 10 m | 0553 0107 | |||
CS Service software incl. PC connection set for FA/VA 5xx sensors | 0554 2007 | |||
Closing cap for measuring section in aluminium | 0190 0001 | |||
Closing cap for measuring section stainless steel 1.4404 | 0190 0002 | |||
M12 – T plug for VA 500/520 to connect several sensors | 20000823 | |||
Mains units: | ||||
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx, 100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A |
0554 0110 | |||
AC adapter plug 100-240 V AC/ 24 V for VA/FA 500/520 | 0554 0109 | |||
External display, chart recorder DS 400 | 0500 4000 | |||
Calibration and adjustment: | ||||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
5 point precision calibration of new instrument with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
Flow measurement DS 400 for compressed air and gases | ||||
Catalogue page 90 | Order no. | |||
Flow station DS 400 for installation into existing pipelines consisting of: | 0601 4006 | |||
consisting of: | ||||
Chart recorder DS 400 and flow sensor VA 500 in standard version (92,7 m/s), Sensor length 220 mm |
||||
Options for chart recorder DS 400: | ||||
Integrated data logger for 100 million measured values | Z500 4002 | |||
Integrated Ethernet and RS 485 interface | Z500 4004 | |||
External Gateway PROFIBUS for RS 485 interface connection | Z500 3008 | |||
External Gateway PROFINET for RS 485 interface connection | Z500 3009 | |||
2 additional sensor inputs for analogue sensors (pressure sensors, temperature sensors etc.) | Z500 4001 | |||
2 additional sensor inputs for digital sensors (SDI/Modbus) | Z500 4003 | |||
Integrated webserver | Z500 4005 | |||
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels | Z500 4007 | |||
Option "Totalizer function for analogue signals" | Z500 4006 | |||
VA 500 Verbrauchssensor, mit RS 485 (Modbus-RTU) Schnittstelle, mit Analogausgang 4...20mA und Impulsausgang (galvanisch getrennt) | 0695 5001 | |||
Max. Version (185 m/s) | Z695 5003 | |||
High Speed Version (224 m/s) | Z695 5002 | |||
Display | Z695 5000 | |||
M-Bus (pulse output not available) | Z695 5004 | |||
Sensor length 120 mm | ZSL 0120 | |||
Sensor length 160 mm | ZSL 0160 | |||
Sensor length 220 mm | ZSL 0220 | |||
Sensor length 300 mm | ZSL 0300 | |||
Sensor length 400 mm | ZSL 0400 | |||
Sensor length 500 mm | ZSL 0500 | |||
Sensor length 600 mm | ZSL 0600 | |||
Sensor length 700 mm | ZSL 0700 | |||
Ball valve I/I G 1/2" stainless steel | 3300 0002 | |||
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 | 3300 0006 | |||
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 | 3300 0007 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
Oil and fat free, special cleaning | 0699 4005 | |||
5 point precision calibration of new instrument with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
Further accessories: | ||||
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet |
0554 7040 | |||
Calibration and adjustment: | ||||
5 point precision calibration including ISO certificate | 3200 0001 | |||
DS 400 - Chart recorder | ||||
Catalogue page 92 | Order no. | |||
Product | sensor- input 1+2 |
sensor- input 3+4 |
||
Chart recorder DS400 - with 3.5“ graphic display – easy operation with touch screen | digital | ---------- | 0500 4000 D | |
digital | digital | 0500 4000 DD | ||
digital | analogue | 0500 4000 DA | ||
analogue | ---------- | 0500 4000 A | ||
analogue | analogue | 0500 4000 AA | ||
Options: | ||||
Integrated data logger for 100 Mio. measured values | Z500 4002 | |||
Integrated Ethernet- and RS 485 interface | Z500 4004 | |||
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...) | Z500 4001 | |||
2 additional sensor inputs for digital sensors (SDI/Modbus) | Z500 4003 | |||
External Gateway PROFIBUS for RS 485 interface connection | Z500 3008 | |||
External Gateway PROFINET for RS 485 interface connection | Z500 3009 | |||
Integrated webserver | Z500 4005 | |||
"Mathematics calculation function" for 4 freely selectable channels, (virtual channels): addition, subtraction, division, multiplication |
Z500 4007 | |||
"Totalizer function for analogue signals" | Z500 4006 | |||
Further accessories: | ||||
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet |
0554 7040 | |||
CS Soft Network - Database Client/Server Solution (up to 5 DS 400) - 0554.7041 database (MySQL) to Server - data evaluation via Client-Software |
0554 7041 | |||
CS Soft Network - Database Client/Server Solution (up to 10 DS 400) - 0554.7042 database (MySQL) to Server - data evaluation via Client-Software |
0554 7042 | |||
CS Soft Network - Database Client/Server Solution (up to 20 DS 400) - 0554.7043 database (MySQL) to Server - data evaluation via Client-Software |
0554 7043 | |||
CS Soft Network - Database Client/Server Solution (> 20 DS 400) - 0554.7044 database (MySQL) to Server - data evaluation via Client-Software |
0554 7044 | |||
Software Support / h | 9999 9998 | |||
Ready for plug in and parametrization | 0990 0010 | |||
Everything ready for plug in | 0990 0011 | |||
Flow sensor VA 500 | ||||
Catalogue page 93 | Order no. | |||
VA 500 flow sensor, with RS 485 interface (Modbus-RTU), with analogue output 4...20mA and pulse output (galvanically separated) | 0695 5001 | |||
Max. Version (185 m/s) | Z695 5003 | |||
HighSpeed version (224 m/s) | Z695 5002 | |||
Display | Z695 5000 | |||
M-Bus (pulse output not available) | Z695 5004 | |||
Sensor length 120 mm | ZSL 0120 | |||
Sensor length 160 mm | ZSL 0160 | |||
Sensor length 220 mm | ZSL 0220 | |||
Sensor length 300 mm | ZSL 0300 | |||
Sensor length 400 mm | ZSL 0400 | |||
Sensor length 500 mm | ZSL 0500 | |||
Sensor length 600 mm | ZSL 0600 | |||
Sensor length 700 mm | ZSL 0700 | |||
Ball valve I/I G 1/2" stainless steel | 3300 0002 | |||
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301 | 3300 0006 | |||
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571 | 3300 0007 | |||
M12 – T plug for VA 500/520 to connect several sensors | 20000823 | |||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
Oil and fat free, special cleaning | 0699 4005 | |||
5 point precision calibration of new instrument with ISO certificate | 3200 0001 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
Flow sensor VA 520 with integrated measuring section | ||||
Catalogue page 93 | Order no. | |||
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301 | 0695 0520 | |||
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301 | 0695 0521 | |||
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301 | 0695 0522 | |||
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301 | 0695 0523 | |||
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301 | 0695 0526 | |||
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301 | 0695 0524 | |||
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301 | 0695 0525 | |||
Option: | ||||
M-Bus (pulse output not available) | Z695 5004 | |||
Connection cables: | ||||
Connection cable for VA/FA, 5 m, with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m, with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m, with M12 plug | 0553 0120 | |||
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease | 3200 0010 | |||
Option: special cleaning | 0699 4005 | |||
5 point precision calibration with ISO certificate | 3200 0001 | |||
93 | Real gas calibration | 3200 0015 | ||
Real gas calibration for mixed gases | on request | |||
Further accessories: | ||||
Closing cap for measuring section in aluminium | 0190 0001 | |||
Closing cap for measuring section stainless steel 1.4404 | 0190 0002 | |||
M12 – T plug for VA 500/520 to connect several sensors | 020000823 | |||
Flow measurment VA 500/ VA 520 for below gases | ||||
Order no. | ||||
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane | on request | |||
Dew point sensors FA 510 | ||||
93 | Order no. | |||
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface | 0699 0510 | |||
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface | 0699 0512 | |||
Measuring chamber with inner threat G1/2" and mounted male coupling DN 7,2 for quick-lock coupling |
0699 3390 | |||
More measuring chambers please see on catalogue page 60 | ||||
Connection cables for VA/FA sensors | ||||
93 | Order no. | |||
Connection cable for VA/FA, 5 m with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m with M12 plug | 0553 0105 | |||
Connection cable for VA/FA, 20 m with M12 plug | 0553 0120 | |||
Pressure sensors | ||||
Catalogue page 93 | Order no. | |||
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale | 0694 1886 | |||
Precision pressure sensor CS 16, accuracy ± 0.5 % | 0694 3555 | |||
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale | 0694 0356 | |||
Precision Pressure sensor CS 40, accuracy ± 0.5 % | 0694 3930 | |||
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale | 0694 3550 | |||
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale | 0694 3556 | |||
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale | 0694 3554 | |||
Precision pressure sensorCS 100, 0...100 bar, ± 0,5 % accuracy of full scale | 0694 3557 | |||
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale | 0694 3558 | |||
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale | 0694 3559 | |||
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale | 0694 3553 | |||
Precision differential pressure sensor CS 0…400 mbar differential pressure, accuracy: 0.075 % of full scale, static pressure max. 40 bar |
0694 3560 | |||
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 % | 0694 3549 | |||
Calibration of pressure sensor 5 points between 0 and 10/16 bar | 3200 0004 | |||
Precision differential pressure sensor for further measuring, ranges, e. g. 0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar |
on request | |||
Temperature sensors | ||||
93 | Order no. | |||
Screw-in temperature probe PT 100 class A, length: 300 mm, d=6mm, with integrated transducer 4…20 mA = -50°C…+500°C (2-wire) |
0604 0201 | |||
Outdoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm), temperature range: -50°C to +80°C |
0604 0203 | |||
Indoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm), temperature range: -50°C to +80°C |
0604 0204 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 300 mm, d=6 mm, -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0205 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0206 | |||
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends |
0604 0207 | |||
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100 class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends |
0604 0208 | |||
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar material: stainless steel, temperature range: max. +260°C |
0554 0200 | |||
Clamp screwing 6mm; G 1/2" stainless steel clamp ring pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C |
0554 0201 | |||
Connection cables for pressure/temperature sensors | ||||
93 | Order no. | |||
Connection cable for sensors 5 m, with open ends | 0553 0108 | |||
Connection cable for sensors 10 m, with open ends | 0553 0109 | |||
Clamp-on meters | ||||
93 | Order no. | |||
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends | 0554 0510 | |||
Clamp-on ammeter 0…1000 A RMS, 4…20 mA = 0…1000 A, 10-30 VDC, 3 m connection cable with open ends | 0554 0518 | |||
Calibration certificate for clamp-on ammeters, 5 calibration points | 0554 3333 | |||
CS ENERIUM 30 Current/effective power meter for panel mounting | ||||
Catalogue page 93 | Order no. | |||
CS ENERIUM 30 Current/effective power meter for panel mounting, with RS 485 interface |
0554 5355 | |||
Current transformer 100/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm) |
0554 5344 | |||
Current transformer 200/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm) |
0554 5345 | |||
Current transformer 300/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5346 | |||
Current transformer 500/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5347 | |||
Current transformer 600/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm) |
0554 5348 | |||
Current transformer 1000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 65 x 32 mm) |
0554 5349 | |||
Current transformer 2000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 127 x 38 mm) |
0554 5350 | |||
Connection cable CS ENERIUM 30 | ||||
Connection cable for sensors 5 m, with open ends | 0553 0108 | |||
Connection cable for sensors 10 m, with open ends | 0553 0109 | |||
Connection cable variable length, open ends on both sides | 0553 0126 | |||
VA 409 Flow direction switch for compressed air systems | ||||
98 | Order no. | |||
Flow direction switch VA 409 | 0695 0409 | |||
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx, 100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A |
0554 0110 | |||
Connection cable VA/FA Series 400, 5 m with M12 plug | 0553 0104 | |||
Connection cable VA/FA Series 400, 10 m with M12 plug | 0553 0105 | |||
Measuring sections of stainless steel 1.4301 incl. ball valve | ||||
Catalogue page 100 | Up to DN 65 (G2 1/2”) with external thread, from DN 80 with weld neck flange according to DIN 2633 | Order no. | ||
Measuring section G 1/2” 21.3 x 2.6 mm 500 mm | 4000 0015 | |||
Measuring section G 3/4” 26.9 x 2.6 mm 600 mm | 4000 0020 | |||
Measuring section G 1” 33.7 x 3.2 mm 750 mm | 4000 0025 | |||
Measuring section G 1 1/4” 42.4 x 3.2 mm 900 mm | 4000 0032 | |||
Measuring section G 1 1/2” 48.3 x 3.2 mm 1000 mm | 4000 0040 | |||
Measuring section G 2” 60.3 x 3.6 mm 1250 mm | 4000 0050 | |||
Measuring section G 2 1/2” 76.1 x 3.6 mm 1500 mm | 4000 0065 | |||
Measuring section DN 80/88.9 88.9 x 2.0 mm 1850 mm | 4000 0080 | |||
Measuring section DN 100/114.3 114.3 x 2.0 mm 2104 mm | 4000 0100 | |||
Measuring section DN 125/139.7 139.7 x 3.0 mm 2860 mm | 4000 0125 | |||
Measuring section DN 150/168,3 168,3 x 3,0 mm 3110 mm | 4000 0150 | |||
Accessories: | ||||
Drilling jig incl. drill (Ø 13 mm) | 0530 1108 | |||
High-pressure protection f. installation from 10 to 50 bar (for VA400/500) | 0530 1105 | |||
High-pressure protection f. installation from 10 to 100 bar (for VA 550) | 0530 1115 | |||
High-pressure protection f. installation from 10 to 16 bar DVGW (for VA 550) | 0530 1116 | |||
Drilling clamp incl. ball valve 1/2" | ||||
Catalogue page 101 | Order no. | |||
Spot drilling collar for pipe diameter 032 - 036 mm, length: 100 mm | 0500 0446 | |||
Spot drilling collar for pipe diameter 036 - 040 mm, length: 100 mm | 0500 0448 | |||
Spot drilling collar for pipe diameter 040 - 044 mm, length: 150 mm | 0500 0449 | |||
Spot drilling collar for pipe diameter 044 - 051 mm, length: 200 mm | 0500 0610 | |||
Spot drilling collar for pipe diameter 048 - 055 mm, length: 200 mm | 0500 0611 | |||
Spot drilling collar for pipe diameter 052 - 059 mm, length: 200 mm | 0500 0612 | |||
Spot drilling collar for pipe diameter 057 - 064 mm, length: 200 mm | 0500 0613 | |||
Spot drilling collar for pipe diameter 063 - 070 mm, length: 200 mm | 0500 0614 | |||
Spot drilling collar for pipe diameter 070 - 077 mm, length: 200 mm | 0500 0615 | |||
Spot drilling collar for pipe diameter 075 - 083 mm, length: 200 mm | 0500 0616 | |||
Spot drilling collar for pipe diameter 082 - 090 mm, length: 200 mm | 0500 0617 | |||
Spot drilling collar for pipe diameter 087 - 097 mm, length: 200 mm | 0500 0618 | |||
Spot drilling collar for pipe diameter 095 - 104 mm, length: 200 mm | 0500 0619 | |||
Spot drilling collar for pipe diameter 102 - 112 mm, length: 200 mm | 0500 0620 | |||
Spot drilling collar for pipe diameter 108 - 118 mm, length: 200 mm | 0500 0621 | |||
Spot drilling collar for pipe diameter 118 - 128 mm, length: 200 mm | 0500 0622 | |||
101 | Spot drilling collar for pipe diameter 125 - 135 mm, length: 200 mm | 0500 0623 | ||
Spot drilling collar for pipe diameter 133 - 144 mm, length: 200 mm | 0500 0624 | |||
Spot drilling collar for pipe diameter 145 - 155 mm, length: 250 mm | 0500 0625 | |||
Spot drilling collar for pipe diameter 151 - 161 mm, length: 250 mm | 0500 0626 | |||
Spot drilling collar for pipe diameter 159 - 170 mm, length: 250 mm | 0500 0627 | |||
Spot drilling collar for pipe diameter 168 - 180 mm, length: 250 mm | 0500 0628 | |||
Spot drilling collar for pipe diameter 180 - 191 mm, length: 250 mm | 0500 0629 | |||
Spot drilling collar for pipe diameter 193 - 203 mm, length: 300 mm | 0500 0630 | |||
Spot drilling collar for pipe diameter 200 - 210 mm, length: 300 mm | 0500 0631 | |||
Spot drilling collar for pipe diameter 209 - 220 mm, length: 300 mm | 0500 0632 | |||
Ball valve G 1/2" I - R 1/2"O | 0500 3009 | |||
Thickness meter CS 0495 | ||||
101 | Order no. | |||
Thickness meter CS 0495, incl. case and calibration block | 0560 0495 | |||
Re-calibration (not discountable) | ||||
103 | Order no. | |||
Re-calibration and 5 point precision alignment of consumption sensor with ISO certificate | 0695 3333 | |||
Real gas calibration | 3200 0015 | |||
Real gas calibration for mixed gases | on request | |||
OIL-Check & Particle counter PC 400 | ||||
Stationary solution DS 500 | Order no. | |||
DS 500 – intelligent chart recorder in basic version (4 sensor inputs) | 0500 5000 | |||
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places | 0554 8040 | |||
Residual oil measurement: OIL-Check 400 – residual oil content measurement of the vaporous residual oil content from 0.001…2,5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration, without integrated display, with analogue output 0…10 Volt for connection to an external chart recorder. |
0699 0070 | |||
Sampling system OIL-Check 400: Sampling system consisting of ½“ ball valve (oil- and grease-free), 1 m stainless steel tube 6x1 mm (oil- and grease-free), clamp screwing (oil- and grease-free) |
Z699 0075 | |||
Alternative: Portable sampling system consisting of 2 m PTFE hose, quick-lock coupling (oil- and grease-free) |
Z699 0074 | |||
Options for systems > 16 bar: Pressure reducer (oil- and grease-free), input pressure max. 300 bar, output pressure up to 10 bar |
Z699 0076 | |||
Connection cable for probes, 5 m with open ends | 0553 0108 | |||
PC 400 particle counter up to 0.1 µm for compressed air and gases, incl. pressure reducer/sampling hose/ calibration certificate, Modbus-RTU interface | 0699 0040 | |||
Connection cable for probes, 5 m with open ends | 0553 0108 | |||
FA 510 dew point sensor for adsorption driers -80°...20°Ctd incl. inspection certificate, 4...20 mA analogue output (3-wire technology) and Modbus-RTU interface |
0699 0510 | |||
Standard measuring chamber up to 16 bar | 0699 3390 | |||
Connection cable for VA/FA Series, 5 m | 0553 0104 | |||
Mobile solution with DS 500 mobile, OIL-Check 400, PC 400, FA 510 | Bestell-Nr. | |||
DS 500 mobile - intelligent chart recorder with 4 sensors inputs | 0500 5012 | |||
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places | 0554 8040 | |||
Residual oil measurement: OIL-Check 400 – residual oil measurement of the vaporous residual oil content from 0.001…2.5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration, without integrated display, with analogue output 0…10 Volt for connection to external chart recorders |
0699 0070 | |||
Mobile transport trolley including roles (outer dimensions: 1.0 x 0.7 x 0.35 m (W x H x D) with firmly mounted components of OIL-Check 400, PC 400, FA 510 |
0554 6017 | |||
Mobile sampling system consisting of 2 m PTFE hose, quick lock coupling (oil- and grease-free) | Z699 0074 | |||
Connection cable for pressure, temperature, third party sensors to portable devices, ODU / open ends, 5 m |
0553 0501 | |||
PC 400 particle counter up to 0.1 µm for compressed air and gases, incl. pressure reducer/sampling hose, calibration certificate, Modbus-RTU interface |
0699 0040 | |||
Connection cable for probes, 5 m with open ends | 0553 0501 | |||
FA 510 dew point sensor, -80°...+20°Ctd, incl. mobile measuring chamber and 5 m connection cable to portable devices | 0699 1510 | |||
OIL-Check 400 – stationary solution with DS 400 | Order no. | |||
OIL-Check 400 – residual oil content measurement of the vaporous residual oil content from 0.001…2,5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration, without integrated display, with analogue output 0…10 Volt for connection to an external chart recorder | 0699 0070 | |||
Option: DS 400 chart recorder integrated in the OIL-Check 400 | Z699 0071 | |||
Sampling OIL-Check 400: Sampling system consisting of ½“ ball valve (oil- and grease-free), 1 m stainless steel tube 6x1 mm (oil- and grease-free), clamp screwing (oil- and grease-free) |
Z699 0075 | |||
Alternative: Portable sampling system consisting of 2 m Teflon hose, quick-lock coupling (oil- amnd gas free) |
Z699 0074 | |||
Options for systems > 16 bar: Pressure reducer (oil- and grease-free), input pressure max. 300 bar, output pressure up to 10 bar |
Z699 0076 | |||
Optionen for DS 400: | Bestell-Nr. | |||
Option: Integrated data logger for 100 million measured values | Z500 4002 | |||
Option: Integrated Ethernet and RS 485 interface | Z500 4004 | |||
Option: Integrated Webserver | Z500 4005 | |||
Option: 2 additional sensor inputs for analogue sensors (pressure sensors, temperature sensors and so on) | Z500 4001 | |||
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places | 0554 8040 | |||
OIL-Check 400 portable solution with handle | Order no. | |||
OIL-Check 400 – residual oil measurement of the vaporous residual oil content from 0.001…2.5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration. Without integrated display, with alarm output 0…10 Volt for connection to external chart recorder | 0699 0070 | |||
Option: DS 400 chart recorder integrated in the OIL-Check 400 | Z699 0071 | |||
Option: Handle and pedestal for mobile use of the OIL-Check 400 | Z699 0072 | |||
Alternative: | ||||
Option: Flight case for OIL-Check 400 | Z699 0073 | |||
Option: Mobile sampling system consisting of 2 m PTFE hose, quick lock coupling (oil- and grease-free) | Z699 0074 | |||
Optionen for DS 400: | ||||
Option: Integrated data logger for 100 million measured values | Z500 4002 | |||
Option: Integrated Ethernet and RS 485 interface | Z500 4004 | |||
Option: Integrated Webserver | Z500 4005 | |||
Option: 2 additional sensor inputs for analogue sensors (pressure sensors, temperature sensors and so on) | Z500 4001 | |||
CS Basic - data evaluation in graphic and table form - readout of the measured data via USB or Ethernet. License for 2 working places | 0554 8040 | |||
Descreption | Order no. | |||
Replacement unit OIL-Check for the period of re-calibration | 0699 3910 | |||
Replacement unit OIL-Check incl. DS 400 for the period of re-calibration | 0699 3920 | |||
Re-calibration OIL-Check incl. Certificate | 0699 3301 | |||
Re-calibration and maintenance OIL-Check incl. certificate, rate 1 for up to 8760 hours of operatio | 0699 3302 | |||
Re-calibration and maintenance OIL-Check incl. certificate, rate 2 for over 8760 hours of operation | 0699 3303 | |||
LD 500/510 leak detector | ||||
Katalogseite 114-117 | order-no. | |||
Set LD 500 | 0601 0105 | |||
consisting of: | ||||
LD 500 leak detector with acoustic trumpet, and integrated camera, 100 leak tags for marking the leakages on site |
0560 0105 | |||
Transportation case | 0554 0106 | |||
Sound-proof headset | 0554 0104 | |||
Focus tube with focus tip | 0530 0104 | |||
AC adapter plug | 0554 0009 | |||
Helix cable for connecting the ultrasonic sound sensor | 02000 1402 | |||
Set LD 510 | 0601 0106 | |||
consisting of: | ||||
LD 510 leak detector incl. acoustic trumpet, with integrated camera and additional input forexternal sensors, 100 leak tags for marking the leakages on site | 0560 0106 | |||
Transportation case | 0554 0106 | |||
Sound-proof headset | 0554 0104 | |||
Focus tube with focus tip | 0530 0104 | |||
AC adapter plug | 0554 0009 | |||
Helix cable for connecting the ultrasonic sound sensor | 02000 1402 | |||
Equipment: | ||||
CS Leak Reporter – for detailed ISO 50001 reports. Gives an illustrated survey of the found leakages and their possible savings. Measures for elimination including status display can be defined for every leakage. |
0554 0105 | |||
Gooseneck for leakage detection at sites which are difficult to access | 0530 0105 | |||
Parabolic mirror for leak detection at long distances | 0530 0106 | |||
Ultrasonic tone generator for leak testing | 0554 0103 | |||
500 leak tags for marking the leakages on site | 0530 0107 | |||
Calibration: | ||||
Recalibration LD 500/LD510 inclusive certificate | 0560 3333 | |||
Further sensors / accessories for connection to LD 510: | ||||
FA 510 dew point sensor for mobile devices, -80…+20°Ctd, incl. mobile measuring chamber, 5m connection cable and perforated protection cap |
0699 1510 | |||
Flow sensor VA 500, Max version (185 m/s) sensor length 220 mm, incl. 5 m connection cable |
0695 1124 | |||
Standard pressure sensor CS 16, 0…16 bar, ± 1 % accuracy of f. s | 0694 1886 | |||
Differential pressure sensor 1.6 bar diff. | 0694 3561 | |||
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU /open ends, 5 m | 0553 0501 | |||
CS Basic 2018 - data evaluation in graphic and table form - reading out of the measured data via USB Stick or Ethernet. License for 2 computers | 0554 8040 | |||
LD 400 Leak detector | ||||
118-119 | Order no. | |||
Set LD 400 leak detector | 0601 0104 | |||
consisting of: | ||||
LD 400 Leak detector | 0560 0104 | |||
Transport case | 0554 0106 | |||
Sound-proof headset | 0554 0104 | |||
Focus tube with focus tip | 0530 0104 | |||
Battery charger | 0554 0009 | |||
Acoustictrumpet | 0530 0109 | |||
Accessory, not included in the set: | ||||
Ultrasonic tone generator | 0554 0103 | |||
Affordable differential pressure sensor for testing filter performance | ||||
120-121 | Order no. | |||
Differential Pressure Sensor 1.6 bar diff | 0694 3561 | |||
Connection cables: | ||||
Connection cable for sensors 5 m with open ends | 0553 0108 | |||
Connection cable for sensors 10 m with open ends | 0553 0109 | |||
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU / open ends, 5 m |
0553 0501 | |||
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU / open ends, 10 m |
0553 0502 | |||
For mobile measurements in a set with PI 500: | ||||
PI 500 portable measuring instrument with integrated data logger | 0560 0511 | |||
Differential Pressure Sensor 1.6 bar diff | 0694 3561 | |||
Connection cable for pressure, temperature or external sensors on mobile instruments, ODU / open ends, 5 m | 0553 0501 | |||
For stationary measurements in a set with DS 52: | ||||
DS 52 LED display in wall housing | 0500 0009 | |||
Differential Pressure Sensor 1.6 bar diff | 0694 3561 | |||
Connection cable for sensors 5 m with open ends | 0553 0108 | |||
DS 52 – Digital process meter | ||||
122 | Order no. | |||
DS 52 LED display in wall housing | 0500 0009 | |||
Options: | ||||
Supply 24 VDC instead of 230 VAC | Z500 0001 | |||
Supply 110 VAC instead 230 VAC | Z500 0002 | |||
Alarm unit mounted at wall housing | Z500 0003 | |||
Alarm unit for external mounting | Z500 0004 | |||
DS 52 – all-in one set for pressure monitoring /alerting, consisting of DS 52 LED display and pressure sensor 0...16 bar |
on request | |||
DS 52 – all-in one set for temperature monitoring /alerting, consisting of DS 52 LED display and screw-in temperature probe -50...+500°C |
on request | |||
DS 51 – Digital panel meter | ||||
123 | Order no. | |||
DS 51 – digital meter for panel mounting, supply 230 VAC, sensor input for 0(4)...20 mA signal, 2 alarm relays |
0500 0006 | |||
Options: | ||||
Supply 24 VDC instead of 230 VAC | Z500 0001 | |||
Supply 110 VAC instead of 230 VAC | Z500 0002 | |||
Re-Calibration and service (not discountable) | ||||
64 + 103 | Order no. | |||
Re-calibration and precision alignment | 0699 3333 | |||
Additional calibration point pressure dew point | 0700 7710 | |||
Re-calibration and 5 point precision alignment of flow sensor with ISO certificate | 0695 3333 | |||
Replacement unit for the period of re-calibration | 0699 3900 | |||
Dew point meter in exchange with calibration certificate from our instrument pool | 0699 3990 | |||
Flow sensor with calibration certificate from our instrument pool | 0695 3990 | |||
Re- calibration Oil Check with Certificate | 0699 3301 | |||
Re- calibration and maintenance Oil Check, with Certificate, rate 1 up to 8760 hours of operation | 0699 3302 | |||
Re- calibration and maintenance Oil Check, with Certificate, rate 2 over 8760 hours of operation | 0699 3303 | |||
Replacement unit OIL-Check for the period of re-calibration | 0699 3910 | |||
Replacement unit OIL-Check with DS 400 for the period of re-calibration | 0699 3920 | |||
Re- calibration particle counter PC 400 with Certificate | 0699 3304 | |||
Products not included in the catalogue: | ||||
FA 540 dew point sensor with same pinning at M12 plug as FA 410 |
||||
FA 540 dew point sensor for desiccant driers -80...20°Ctd incl. inspection certificate, 4…20 mA output signal (3-wire connection) |
0699 0540 | |||
FA 540 dew point sensor for refrigeration driers -20...50°Ctd incl. inspection certificate, 4…20 mA output signal (3-wire connection) |
0699 0542 | |||
Connection cables: | ||||
Connection cable for VA/FA, 5 m, with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m, with M12 plug | 0553 0105 | |||
Options for FA 540: | ||||
Option max. pressure FA5xx 350 bar | Z699 0515 | |||
Option special scaling FA5xx, 4…20 mA=__ … __ g/m³, ppm etc. | Z699 0514 | |||
Option connection thread FA5xx, 5/8" UNF | Z699 0511 | |||
Option surface condition FA5xx, free of oil & grease | Z699 0517 | |||
Additional accessories: | ||||
Standard measuring chamber up to 16 bar | 0699 3390 | |||
High pressure measuring chamber up to 350 bar | 0699 3590 | |||
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread | 0699 3290 | |||
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx, 100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A |
0554 0110 | |||
CS Service software incl. PC connection set for FA540/545 sensors | 0554 2008 | |||
Calibration and adjustment: | ||||
Precision calibration at 3°Ctd including ISO certificate | 0699 3396 | |||
Additional calibration point, freely selectable | 0700 7710 | |||
FA 545 dew point sensor with same pinning at M12 plug as FA 415 |
||||
FA 545 dew point sensor for refrigeration driers -20...50°Ctd incl. inspection certificate, 4…20 mA output signal (2-wire connection) |
0699 0547 | |||
FA 545 dew point sensor for desiccant driers -80...20°Ctd incl. inspection certificate, 4…20 mA output signal (2-wire connection) |
0699 0545 | |||
Connection cables: | ||||
Connection cable for VA/FA, 5 m, with M12 plug | 0553 0104 | |||
Connection cable for VA/FA, 10 m, with M12 plug | 0553 0105 | |||
Options for FA 545: | ||||
Option max. pressure FA5xx 350 bar | Z699 0515 | |||
Option special scaling FA5xx, 4…20 mA=__ … __ g/m³, ppm etc. | Z699 0514 | |||
Option connection thread FA5xx, 5/8" UNF | Z699 0511 | |||
Option surface condition FA5xx, free of oil & grease | Z699 0517 | |||
Additional accessories: | ||||
Standard measuring chamber up to 16 bar | 0699 3390 | |||
High pressure measuring chamber up to 350 bar | 0699 3590 | |||
Measuring chamber,stainless steel 1.4305, for dew point measurement in gases/air, up to 350 bar gas inlet: G ¼” inner thread, gas outlet: G ¼“ inner thread, sensor connection: G ½” inner thread | 0699 3290 | |||
Mains unit in wall housing for maximum 2 sensors of the series VA/FA 5xx, 100-240 V, 23 VA, 50-60 Hz / 24 VDC, 0.35 A |
0554 0110 | |||
CS Service software incl. PC connection set for FA540/545 sensors | 0554 2008 | |||
Calibration and adjustment: | ||||
Precision calibration at 3°Ctd including ISO certificate | 0699 3396 | |||
Additional calibration point, freely selectable | 0700 7710 |
Đại lý phân phôi chính hãng CS-Instrument Việt Nam - Đại lý CS Instrument Việt Nam
- Mark-10 VietNam
- AT2E VietNam
- Teclock VietNam
- WISE Control VietNam
- Nireco VietNam
- Econex VietNam
- Redlion VietNam
- Matsushima VietNam
- Bircher VietNam
- Masibus VietNam
- KELLER VietNam
- Atlas Copco VietNam
- Schneider Electric Viet Nam
- Masoneilan VietNam
- Aira VietNam
- ROTORK VietNam
- Pavone Sistemi VietNam
- Fox Instruments VietNam
- TEMPSENS VietNam
- RADIX VietNam
- TDK Lambda VietNam
- AMETEK VietNam
- LAND AMETEK VietNam
- PISCO VietNam
- TOKYO KEIKI VietNam
- Pce-Instruments VietNam
- Elettrotekkabel VietNam
- Pora VietNam
- Bronkhorst VietNam
- Fairchild VietNam
- Mehrer VietNam
- Baummuller VietNam
- SPOHN BURKHARDT VietNam
- Daiichi Electric VietNam
- Beckhoff VietNam
- DMN-WESTINGHOUSE VietNam
- Ohkura VietNam
- Temavasconi VietNam
- CEIA VietNam
- Hans-Schmidt VietNam
- Okazaki-MFG VietNam
- IBA-AG VietNam
- Adlerspa VietNam
- Prosensor VietNam
- IPF-Electronic VietNam
- Elco Holding VietNam
- Autrol VietNam
- Mdexx VietNam
- Staubli VietNam
- Krebs and Riede VietNam
- WATANABE VietNam
- Koganei Vietnam
- Norgren VietNam
- Festo VietNam
- Schenck Process VietNam
- Bussmann VietNam
- Minimax VietNam
- Cometsystem VietNam
- Knick-International Viet Nam
- Meggitt VietNam
- Riels VietNam
- Tek-trol VietNam
- Gastron VietNam
- Sauter controls VietNam
- Lapar Viet Nam
- Krohne VietNam
- BCS Italy VietNam
- Vega VietNam
- Bekomat VietNam
- Sitec-Components VietNam
- CS Instrument Viet Nam
- Gemu VietNam
- SEMIKRON Viet Nam
- Spare Parts
- Labom Viet Nam
- Hirose Valves VietNam
- Medenus VietNam
- Fotoelektrik Pauly VietNam
- Helukabel VietNam
- Ashcroft VietNam
- Rechner sensor VietNam
- Fireye VietNam
- Brooks Instrument VietNam
- Kometer VietNam
- Tester Sangyo VietNam
- Brugger Feinmechanik VietNam
- Kracht Corp VietNam
- Thwing Albert VietNam
- Guenther VietNam
- ThermoTech Sensors VietNam
- Dwyer VietNam
- Donjoy Technology VIETNAM
-
Trực tuyến:3
-
Hôm nay:230
-
Tuần này:3431
-
Tháng trước:15079
-
Tất cả:1992342