Công ty TNHH TM và DV Tăng Minh Phát đại lý phân phối chính thức các sản phẩm hãng Lapar tại Việt Nam - Đại lý Lapar Việt Nam - Đại lý Valveu Viêt Nam
Link sản phẩm hãng : https://www.valveu.com/productCác dòng sản phẩm của hãng Lapar Control Valve:
1, Van bướm Lapar - Đại lý Lapar Việt Nam
2, Van bi - Đại lý Lapar Việt Nam
3, Van điều khiển - Đại lý Lapar Việt Nam
4, Van vệ sinh - Đại lý Lapar Việt Nam
5, Van nhựa - Đại lý Lapar Việt Nam
6, Cổng / Quả cầu / Van kiểm tra - Đại lý Lapar Việt Nam
7, Thiết bị truyền động - Đại lý Lapar Việt Nam
8, Phụ kiện - Đại lý Lapar Việt Nam
LPB14 High Performance Butterfly Valve
High Performance Butterfly Valve
Design Feature
- Horizontal pin: Reduce the exploding possibility of stem effectively under the internal unbearable pressure.
- Disc: There is no stem through disc completely for less resistance and more flow capacity.
- Stem: The design of two section of stem, can enhance the stability and resistance of disc effectively.
- Guide bearing: It is made by nylon and can ensure that the shaft rotate in absolute center,to decrease friction and torque.
- The seat with backrest: It is consisted of inner backrest and outer rubber.the backrest can withstand the deformation of seat when it is scoured and squeezed to extend service life.
Standard
- Valve body is designed to meet MSS SP-67 and API609.
- Upper flange standards: Valve mounting flange and stem shall be per ISO 5211.
- Flange Standard: GB 9113.1N ANSI 150 B16.5、JIS B2211.
- Pressure Rating:
- Bi-directional bubble-tight shut off to: 16 bar(230psi) DN40~DN600mm
- And tested to 110% of full rating: 18 bar(260psi) DN40~DN600mm
- Shell Testing:
- The body strength can stand 150% of full rating: 24 bar(340psi) DN40~DN600mm
Main Features
- Tight sealing and zero leakage under rated pressure(1.0Mpa~1.6Mpa).
- Multi-sealing design separates valve body from working medium to ensure zero leakage.
- Main parts are designed to fit exactly into each other to ensure a better sealing, smaller torque, bigger flow, lower fluid resistance as well as flexible two-side flow.
- Scientific design for the sealing surface of valve seat makes a closed connection between the valve and the pipe flange without any additional ccessories.
- Designed and produced based on multi-standard system, so the valve could be applied to various of flange and enjoy excellent interchangability.
- All parts are embalmed, suitable for various complex work environment.
- Others: According to customer requirements.
Parameter
Actuator | Electric, Pneumatic, Turbine, Handle |
Control | On-off, Modulating, Inteligent |
DN | 50~1200mm |
Pressure | 150~300Lbs |
Temperature | EPDM: -29~120°C, FPM: -29~150°C PTFE: -29~150°C, CR: -29~80°C NBR: -29~80°C, SI: -29~200°C |
Connection | Wafer |
Structure | A Type, LT Type |
Body Material | SS304L, WCB, Casting Iron, Ductile Iron |
Disc Material | SS316L, SS316, SS304, Casting Iron, Casting Iron+Nylon11 B148, FEP (Casting Iron+F46) |
Seat Material | NBR, EPDM, PTFE, FPM, CR, SI |
Medium | Gas, Water, Oil |
Option | Limit Switch, Positioner, Solenoid Valve, Pressure-relief Valve |
Pneumatic High Performance Butterfly Valve
Pneumatic High Performance Butterfly Valve
Van bướm hiệu suất cao LPB14 Lapar Việt nam - Đại Lý Valveu Việt Nam
Bình luận của bạn
Bộ chuyển hướng SPTD liệu dạng bột và viên cho ngành nhựa (tái chế) và hóa dầu
Giá: Liên hệ
5 , 1 1 -1Van quay ngành công nghiệp thực phẩm sữa - AL-AXL DAIRY HIGH DUTY ROTARY VALVE
Giá: Liên hệ
5 , 1 1 -1GEMU D488 Victoria Motorized butterfly valve - Đại lý phân phối Gemu tại Việt Nam
Giá: Liên hệ
5 , 1 1 -1Motorized butterfly valve GEMU D458 - Đại lý phân phối chính hãng Gemu Việt Nam
Giá: Liên hệ
5 , 1 1 -1Van bi thân mỏng LPA16 Lapar tại Việt nam- Đại lý phân phối van Valveu việt nam
Giá: Liên hệ
5 , 1 1 -1Đại lý phân phối van bi 3 chiều LAP14 Lapar tại Việt Nam - Đâị lý Valveu Việt Nam
Giá: Liên hệ
5 , 1 1 -1Danh mục sản phẩm
- Mark-10 VietNam
- AT2E VietNam
- Teclock VietNam
- WISE Control VietNam
- Nireco VietNam
- Econex VietNam
- Redlion VietNam
- Matsushima VietNam
- Bircher VietNam
- Masibus VietNam
- KELLER VietNam
- Atlas Copco VietNam
- Schneider Electric Viet Nam
- Masoneilan VietNam
- Aira VietNam
- ROTORK VietNam
- Pavone Sistemi VietNam
- Fox Instruments VietNam
- TEMPSENS VietNam
- RADIX VietNam
- TDK Lambda VietNam
- AMETEK VietNam
- LAND AMETEK VietNam
- PISCO VietNam
- TOKYO KEIKI VietNam
- Pce-Instruments VietNam
- Elettrotekkabel VietNam
- Pora VietNam
- Bronkhorst VietNam
- Fairchild VietNam
- Mehrer VietNam
- Baummuller VietNam
- SPOHN BURKHARDT VietNam
- Daiichi Electric VietNam
- Beckhoff VietNam
- DMN-WESTINGHOUSE VietNam
- Ohkura VietNam
- Temavasconi VietNam
- CEIA VietNam
- Hans-Schmidt VietNam
- Okazaki-MFG VietNam
- IBA-AG VietNam
- Adlerspa VietNam
- Prosensor VietNam
- IPF-Electronic VietNam
- Elco Holding VietNam
- Autrol VietNam
- Mdexx VietNam
- Staubli VietNam
- Krebs and Riede VietNam
- WATANABE VietNam
- Koganei Vietnam
- Norgren VietNam
- Festo VietNam
- Schenck Process VietNam
- Bussmann VietNam
- Minimax VietNam
- Cometsystem VietNam
- Knick-International Viet Nam
- Meggitt VietNam
- Riels VietNam
- Tek-trol VietNam
- Gastron VietNam
- Sauter controls VietNam
- Lapar Viet Nam
- Krohne VietNam
- BCS Italy VietNam
- Vega VietNam
- Bekomat VietNam
- Sitec-Components VietNam
- CS Instrument Viet Nam
- Gemu VietNam
- SEMIKRON Viet Nam
- Spare Parts
- Labom Viet Nam
- Hirose Valves VietNam
- Medenus VietNam
- Fotoelektrik Pauly VietNam
- Helukabel VietNam
- Ashcroft VietNam
- Rechner sensor VietNam
- Fireye VietNam
- Brooks Instrument VietNam
- Kometer VietNam
- Tester Sangyo VietNam
- Brugger Feinmechanik VietNam
- Kracht Corp VietNam
- Thwing Albert VietNam
- Guenther VietNam
- ThermoTech Sensors VietNam
- Dwyer VietNam
- Donjoy Technology VIETNAM
Hỗ trợ trực tuyến
Liên hệ tư vấn mua hàng
Thống kê truy cập
-
Trực tuyến:3
-
Hôm nay:770
-
Tuần này:1694
-
Tháng trước:10260
-
Tất cả:2215830
Video Clip