Thiết bị đo lưu lượng khí EL-FLOW PRESTIGE FG-110C Bronkhorst Việt Nam

Mã sản phẩm:

FG-110C

Email:

sale01@tmpvietnam.com

Hãng sản xuất:

Bronkhorst

Xuất xứ:

Hà Lan

Liên hệ:

0946452592

Mô tả:

TMP đại lý Bronkhorst Việt Nam

Chia sẻ:

Số lượng

Chi tiết sản phẩm

TMP đại lý Bronkhorst Việt Nam.

EL-FLOW PRESTIGE FG-110C

High Performance Mass Flow Meter for Gases

On-board gas conversion model (Multi-Fluid / Multi-Range)
100 unique gases embedded
User configurable I/O functions
Significantly reduced power consumption
Further advances in flow-signal processing

Get a quote Downloads Support

EL-FLOW PrestigeFG-110C

Gas Mass Flow Meters for lowest flow rates

Bronkhorst^® model FG-110C High Performance Mass Flow Meters (MFMs) are suited for precise measurement of flow ranges between 0,014…0,7 ml_n/min and 0,18…9 ml_n/min at operating pressures between vacuum and 100 bar. The MFM consists of a thermal mass flow sensor and a microprocessor based pc-board with signal and fieldbus conversion and a PID controller for optional mass flow control by means of a separately mounted control valve.

EL-FLOW^® Prestige series are equipped with a digital pc-board, offering high accuracy, excellent temperature stability and fast response. The main digital pc-board contains all of the general functions needed for measurement and control. In addition to the standard RS232 output the instruments also offer analog I/O. As an option, an on-board interface can be mounted to provide DeviceNet™, PROFIBUS DP, Modbus, EtherCAT^®, PROFINET or FLOW-BUS protocols. The EL-FLOW^® Prestige design features standard Multi Gas / Multi Range functionality, providing (OEM-) customers with optimal flexibility and process efficiency.

Technical specifications

Measurement / control system
Flow range, based on N₂ (intermediate ranges available)	min. 0,014…0,7 ml_n/min max. 0,18…9 ml_n/min
Accuracy (incl. linearity) (based on actual calibration)	standard: ±0,5% Rd plus ±0,1%FS (±0,8% Rd plus ±0,2% FS for ranges 3...5 mln/min; ±1% Rd plus ±1% FS for ranges < 3 mln/min)
Repeatability	< 0,2% Rd
Turndown	1 : 150; in analog mode 1 : 50
Multi Gas / Multi Range	embedded gas data for 100 unique gases, plus any mixture of maximum 5 of these gases. MG/MR functionality available up to 100 bar.
Operating temperature	-10…70°C
Temperature sensitivity	zero: < 0,02% FS/°C; span: < 0,025% Rd/°C
Pressure sensitivity	< 0,15% Rd/bar typical N₂; < 0,02% Rd/bar N₂ (incl. pressure correction option)
Leak integrity, outboard	tested < 2 x 10^-9 mbar l/s He
Attitude sensitivity	max. error at 90º off horizontal 0,07% FS at 1 bar, typical N₂
Warm-up time	30 min. for optimum accuracy

Mechanical parts
Material (wetted parts)	stainless steel 316L or comparable, degreased for use on oxygen (O₂)
Pressure rating	100 bar (g)
Process connections	compression type or face seal couplings
Seals	standard: Viton^® options: EPDM, Kalrez^® (FFKM), FDA and USP Class VI approved compounds
Weight	0,5 kg
Ingress protection (housing)	IP40

Electrical properties
Power supply	+15…24 Vdc
Max. power consumption Meter	Supply 15 V 24 V	at voltage I/O 69 mA 45 mA	at current I/O 92 mA 63 mA
Max. power consumption Controller (controllers based on normally closed valve, pin 5 not used)	Supply 15 V 24 V	at voltage I/O 202 mA 128 mA	at current I/O 225 mA 146 mA
If applicable: PROFIBUS DP	add 53 mA (15 V supply) or 30 mA (24 V supply)
PROFINET	add 76 mA (15 V supply) or 48 mA (24 V supply)
EtherCAT^®	add 66 mA (15 V supply) or 41 mA (24 V supply)
DeviceNet™	add 48 mA (24 V supply)
Analog output/command	0...5 (10) Vdc or 0 (4)…20 mA (sourcing output)
Digital communication	standard: RS232; options: PROFIBUS DP, DeviceNet™, PROFINET, EtherCAT^®, Modbus RTU or ASCII, FLOW-BUS

Electrical connection
Analog/RS232	9-pin D-connector (male);
PROFIBUS DP	bus: 9-pin D-connector (female); power: 9-pin D-connector (male);
Devicenet™	5-pin M12-connector (male);
EtherCAT^®/PROFINET	2 x RJ45 modular jack (in/out)
Modbus/FLOW-BUS	RJ45 modular jack
CE	EMC 2014/30/EU, RoHS 2011/65/EU,
IEC 61010-1	2010