Thiết bị đo lưu lượng kế trong môi trường ăn mòn cao Tek-trol

TEK-FLUX 1400A SERIES ELECTROMAGNETIC FLOWMETER

Tek-Flux 1400A Electromagnetic flowmeter, also called Magmeters, it is a contact instrument used for measuring the volumetric flowrates of any fluid which can adequately conduct electricity in closed pipelines. These instruments are highly accurate, reliable, and stable devices that are used in various high-pressure industrial processes. Tek-Flux 1400A flowmeter operates on the basis of Faraday’s Law of Induction. According to this principle, any change in the magnetic flux, linked to an electric circuit, causes an electromotive force (or voltage) to be induced in this circuit. The induced voltage is therefore directly proportional to the rate of change of magnetic flux with time. It can measure highly corrosive mediums such as concentrated acid and concentrated alkaline using PTFE lining material. By using Titanium electrodes, we can measure seawater, various chloride, and hypo-chloride fluids

GET QUOTE

Features

Specifications

Documents

Model chart

Drawings

Media

• Wide range of nominal diameter Size ½” to 28” (15 mm to 700 mm) with IP68 protection
• Easy maintenance due to no moving parts
• Uninfluenced by temperature, pressure, viscosity, and density
• Used for wide application, can measure conductive fluid, without reference to fibre, solid or suspending material contained in liquid
• High turndown ratio up to 1:100
• It features high intelligence, with back light LCD display, menu setting control, three grades password protection, two-way measuring, slight signal removal, auto flow compensation, and other function.
• Features high intelligence, which ensure empty pipe detection, self-detection, self-diagnostic functions, and safety alarms for upper and lower limit
• Features SMART excitation, which ensures zero-point stability, high reliability, and low power consumption
• Lining and electrode available in various materials which can measure nearly all conductive fluids
• It has multiple signal output, pulse, Modbus RS485 or HART^® or 4 to 20 mA
• The power supply system has good voltage vibration ability
• Meters Batching and Blending Totalization