Thiết bị đo lưu lượng F700 Wise - Đại lý Wisecontrol Việt Nam

Mã sản phẩm:
F700
Liên hệ:
0946452592
Email:
sale01@tmpvietnam.com
Hãng sản xuất:
Wisecontrol
Xuất xứ:
Hàn Quốc
Chia sẻ:
Số lượng
Yêu cầu gọi lại
số điện thoại

Venturi tube_F700

F700

Description

The venturi tube is characterized by its tapered inlet and diverging outlet. This design greatly reduces head loss to the system when compared to an orifice plate, in fact, the venturi can handle 25 ~ 50 % more flow, than an orifice for comparable larger line size and lower head loss. The venturi is well suited for dirty fluids. There are no places for dirt to build up in the tube. Traditionally, the venturi tube has been used on low pressure gas flow, water and waste applications. Venturi tubes are generally constructed with the system of pressure taps which project radially into the pipe and feed into a common camber known as a piazometer ring. This multiple tap arrangement provides an average pressure reading over the entire circumference of the element. As a result, the need for a long pipe runs is eliminated. A general rule is that a venturi tube requires only half the upstream and downstream runs of an orifice plate. The discharge coefficient of the venturi is constant and predictable to ±1 % for pipe reynolds numbers greater than 100,000. Venturi elements are not as reliable at lower reynolds numbers (Figure 10). The venturi tube is a relatively high cost device. However, low pumping costs and reduced piping requirements can make it cost effective.

Specification

Venturi type Fabricated flange type
Fabricated weld-on type
Machined flange type
Machined weld on type
Flow calculation standards ISO 5167-4
Flange ratings JIS 10, 16, 20, 30, 40 and 63K
ANSI class 150, 300, 600 and 900 Lb
Nominal pipe sizes available 50 ~ 1,200 mm
2" ~ 48"
Material Carbon steel
304SS, 316SS and 316L SS

Thiết bị đo lưu lượng F700 Wise - Đại lý Wisecontrol Việt Nam

Bình luận của bạn
*
*
 Captcha
Danh mục sản phẩmDanh mục sản phẩm
Hỗ trợ trực tuyến
Liên hệ tư vấn mua hàng
Thống kê truy cập
  • Trực tuyến:
    3
  • Hôm nay:
    457
  • Tuần này:
    6320
  • Tháng trước:
    14213
  • Tất cả:
    1930762
Video ClipVideo Clip
CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

 VPĐD: No 01,  Street 27, Hiep Binh Chanh Ward, Thu Duc District, Ho Chi Minh City, Vietnam

 Ðiện Thoại:  (028) 35121007                Fax: (028) 35121008

 Nhân viên kinh doanh: Hà Văn Nguyên (Mr.)

 Email:  sale01@tmpvietnam.com        Tel:  0946452592     

 VP tại Đức: Am Boscheler Berg 4a 52134 Herzogenrath

 Website: avantgarde-x.de

Thông tin bottom 2

• Đối với khách hàng
Luôn luôn Lắng nghe , Kết nối và Thỏa mãn.

• Đối với công nghiệp hóa
Không ngừng triển khai công nghệ mới – tối ưu hóa thiết bị.

• Đối với đối tác
Phát triển và xây dựng thương hiệu bền vững.

• Đối với nhân viên
Thu hút tài năng, phát triển kỹ năng và cùng phát triển lâu dài.

Thông tin bottom 3
  • Giao hàng miễn phí
  • Bảo hành 12 tháng.
  • Thanh toán linh động.
  • Làm việc các ngày trong tuần.

© 2017 Tangminhphat.com, all right reserved.

Thiết kế website www.webso.vn

Loading...

Back To Top