TĂNG MINH PHÁT Đại lý phân phối sản phẩm chính hãng Tercom Tại Việt Nam
1, TERCOM ACCESSORIES
Tercom’s Production Line is complete with the following accessories and ancillary instruments though these are frequently used in conjunction with the main instrumentation so far described , they are also available to be sold
loose
ROOT VALVES | CONDENSING POTS | BAR-STOCK VALVES |
FLOW CONDITIONERS | MANIFOLDS | FLOW STRAIGHTENERS |
PRESSURE RELIEF VALVES | ANALYSIS VALVES | |
2, TERCOM AVERAGE PITOTS
“TERFLOW” (Multi-Hole Averaging Pitot Tubes):
For insertion in lines of any size. Simple and fast installation. Good accuracy and repeatability make "TerFlow” a valid alternative for large pipe sizes where use of Orifice Flanges, Venturi tubes or Flow nozzles would be unpractical or too expensive.
”TerFlow” is available in many types of models to cover a wide range of applications. Retractable type models are also available allowing installation or removal of the equipment without system shutdown.
MOUNTING MODEL TR-25 | MODEL TR-25 |
GEAR DRIVE RETRACTION SYSTEM | |
3, TERCOM FLOW NOZZLES
TERCOM Flow nozzles are manufactured in sizes from 2“ to 30” for a wide range of applications at medium and high pressure and temperature.
In many cases Flow Nozzles offer advantages and better performance than Orifice Plates and Venturi Tubes; tipically nozzles have a larger capacity and better accuracy with high velocity flow.
Tercom manufactures Flow Nozzles sized to the Customer’s Specifications and meeting the requirements of most applied and important International Standards such as A.S.M.E. and ISA Standars : pleaserefer to the following Catalog pages for all the different types of Flow Nozzles offered for TERCOM.
MODEL WSD | MODEL WIS | MODEL WIS |
MODEL ISC | MODEL ISI | MODEL THR |
MODEL WIR | MODEL IHR | MODEL IHR |
4, ORIFICE FLANGES AND ORIFICE PLATES
ORIFICE FLANGES are manufactured in sizes from 2“ to 60” for a wide range of applications at medium and high pressure and temperature.
In many cases ORIFICE FLANGES offer advantages and better performance than Flow Nozzles and Venturi Tubes (low price).
Tercom manufactures ORIFICE FLANGES sized to the Customer’s Specifications and meeting the requirements of most applied and important International Standards such as A.S.M.E. and ISA Standars: please refer to the following Catalog pages for all the different types of ORIFICE FLANGES offered for TERCOM.
ORIFICE FLANGE | ORIFICE FLANGE | ORIFICE FLANGE RTJ |
ANULAR CHAMBER TYPE | ANULAR CHAMBER TYPE | MONOLITIC TYPE |
CONCENTRIC SQUARE-EDGE ORIFICE PLATE |
CONCENTRIC SQUARE-EDGE ORIFICE PLATE |
QUADRANT EDGED ORIFICE PLATE |
ECCENTRIC ORIFICE PLATE |
SEGMENTAL ORIFICE PLATE |
CONICAL ENTRANCE ORIFICE PLATE |
RING JOINT ORIFICE PLATE OLDER WITH INTEGRAL PLATE |
RING JOINT ORIFICE PLATE OLDER WITH HOLDING SCREWS |
|
5, TERCOM PRESSURE REDUCERS
MULTISTAGE PRESSURE REDUCERS:
Used for flow or pressure reducing when a simple Restriction Orifice is not suitable due to the high required pressure drop or noise limitations.
Tercom Multistage Pressure Reducers are designed and manufactured to satisfy most applications for gas and liquid.
Manufactured with materials consistent with the pipe line material, Tercom Multistages are available with Butt-Weld or Flanged end connections.
RESTRICTION ORIFICES | MULTI HOLE RESTRICTION ORIFICES |
TYPE A | TYPE B |
MULTI STAGE PRESSURE REDUCERS | |
6, TERCOM STEAM & WATER ANALYSIS SYSTEMS
For Power Plants the control of phisico-chemical characteristics of feed water and the generated steam is of great importance for quality and economical reasons. Tercom offers design and manufacturing of:
- Complete Analysys Systems with temperature and pressure conditioning. The system can be supplied fully or partialy assembled and/or wired on outdoor or indoor racks , assembled on panels or cabinets. We can perform the measurement of the following parameters:
Conductivity | pH | Dissolved Oxygen | Hydrogen |
------------------------------------------------------------------------------------------------------------------------------- | |||
Hydrazine | Silica | Sodium | Turbidity |
Other components and accessories available within this Tercom’s Products Line are the following :
- Sample Cooling Coils
- Cationic Columns
- Self Regulating Pressure Valve
- Instrumentation Panels
FRONT PANEL | REAR PANEL |
IMMERSION FLOW COOLER | COUNTER FLOW COOLER | CAPILARY PRESSURE REDUCER |
SIGHT GLASS | CATIONIC COLUMNS | MECHANICAL FILTERS |
MANUAL GAS SAMPLING | MOUNTING DETAIL |
7, TERCOM THERMOELEMENTS AND THERMOWELLS
THERMOCOUPLES, RTD ASSEMBLIES TEMPERATURE SENSORS:
Manufactured for a wide range of applications and temperature according to ANSI MC 96.1 (Thermocouples) and IEC 751/DIN 43760 (RTD’s) Standards, with High-Purity MgO (Magnesium Dioxide) mineral insulated cables with stainless steel sheath material. Tercom Thermocouples are manufactured in any length with different types of “hot junction”(ungrounded, grounded and exposed) according to the following ANSI types:
- Type “T”(Copper-Constantan) for range -200 to + 350°C
- Type “J” (Iron-Constantan) for range 0 to + 750°C
- Type “E”(Chromel-Constantan) for range - 200 to + 900°C
- Type “K”(Chromel-Alumel) for range - 200 to + 1250°C
- Type “S”(Pt,10% Rhodium -Pt) for range 0 to + 1450°C
- Type “R”(Pt,13% Rhodium -Pt) for range 0 to + 1450°C
- Type “B”(Pt,30%Rh -Pt,6% Rh) for range +800 to + 1700°C
Tercom RTD’s are also available in any length with the following types and temperature ranges:
- Ni type (Nickel) for Temperature Range -60 to + 180°C
- Pt type (Platinum) for Temperature Range - 200 to + 850°C
Both Thermocouples and RTD’s are normally mounted on a Thermowell through a connection head (Weatherproof and Explosionproof types are available) and an extension made with nipple(s) and union (available in carbon steel and stainless steel).Tercom Thermocouples and RTD’s electric and insulation characteristics are tested in a modern equipped plant.
Other important and typical types of Thermocouples and RTD’s supplied by Tercom are the following:
Skin-Type Thermocouples & RTD’s for measurement of the surface or “skin” temperature on boilers, furnaces and heater pipes.
Multipoint Reactor Thermocouples & RTD’s for monitoring and control of the temperature inside process reactors.
THERMOWELLS:
To allow thermocouples & RTD’s mounting a Thermowell is generally necessary to provide adequate protection of the thermoelements.
Tercom thermowells are manufactured in any length with different materials from pipe or bar-stock, with process connections threaded, welded, or flanged to meet practically any type of requirement and process condition.
TERMINAL BLOCKS | THERMOELEMENTS | THERMOELEMENTS HEADS |
BAR STOCK WELL | HIGH VELOCITY WELL | BAR STOCK WELL |
THERMOELEMENTS MOUNTING | SKIN POINT THERMOCOUPLES |
THERMOELEMENTS MULTI-POINT | THERMOELEMENTS MULTI-POINT |
MULTI-POINT-CONNECTION | REACTOR THERMOELEMENTS |
8, TERCOM VENTURI TUBES FLOWMETER
TERCOM Venturi Tubes are manufactured in sizes from 2“ to 48” for a wide range of applications at medium and high pressure and temperature.
In many cases Venturi Tube offer advantages and better performance than Orifice Plates and Flow Nozzle (low pressure loss).
Tercom manufactures Venturi Tubes sized to the Customer’s Specifications and meeting the requirements of most applied and important International Standards such as A.S.M.E. and ISA Standars: please refer to the following Catalog pages for all the different types of Venturi tubes offered by TERCOM.
SERIE TVTL | SERIE TVTL | SERIE TVTB |
SERIE TVTL | SERIE TVTLTB | SERIE TVTB |
SERIE TVTLB | SERIE TVTB | SERIE TVTB |
SERIE TVTBI | SERIE TVTLN | SERIE TVTLN |
SERIE TVTL | ||
Đại lý Tercom Việt Nam - Đại lý phân phối sản phẩm chính hãng Tercom Tại Việt Nam
- Mark-10 VietNam
- AT2E VietNam
- Teclock VietNam
- WISE Control VietNam
- Nireco VietNam
- Econex VietNam
- Redlion VietNam
- Matsushima VietNam
- Bircher VietNam
- Masibus VietNam
- KELLER VietNam
- Atlas Copco VietNam
- Schneider Electric Viet Nam
- Masoneilan VietNam
- Aira VietNam
- ROTORK VietNam
- Pavone Sistemi VietNam
- Fox Instruments VietNam
- TEMPSENS VietNam
- RADIX VietNam
- TDK Lambda VietNam
- AMETEK VietNam
- LAND AMETEK VietNam
- PISCO VietNam
- TOKYO KEIKI VietNam
- Pce-Instruments VietNam
- Elettrotekkabel VietNam
- Pora VietNam
- Bronkhorst VietNam
- Fairchild VietNam
- Mehrer VietNam
- Baummuller VietNam
- SPOHN BURKHARDT VietNam
- Daiichi Electric VietNam
- Beckhoff VietNam
- DMN-WESTINGHOUSE VietNam
- Ohkura VietNam
- Temavasconi VietNam
- CEIA VietNam
- Hans-Schmidt VietNam
- Okazaki-MFG VietNam
- IBA-AG VietNam
- Adlerspa VietNam
- Prosensor VietNam
- IPF-Electronic VietNam
- Elco Holding VietNam
- Autrol VietNam
- Mdexx VietNam
- Staubli VietNam
- Krebs and Riede VietNam
- WATANABE VietNam
- Koganei Vietnam
- Norgren VietNam
- Festo VietNam
- Schenck Process VietNam
- Bussmann VietNam
- Minimax VietNam
- Cometsystem VietNam
- Knick-International Viet Nam
- Meggitt VietNam
- Riels VietNam
- Tek-trol VietNam
- Gastron VietNam
- Sauter controls VietNam
- Lapar Viet Nam
- Krohne VietNam
- BCS Italy VietNam
- Vega VietNam
- Bekomat VietNam
- Sitec-Components VietNam
- CS Instrument Viet Nam
- Gemu VietNam
- SEMIKRON Viet Nam
- Spare Parts
- Labom Viet Nam
- Hirose Valves VietNam
- Medenus VietNam
- Fotoelektrik Pauly VietNam
- Helukabel VietNam
- Ashcroft VietNam
- Rechner sensor VietNam
- Fireye VietNam
- Brooks Instrument VietNam
- Kometer VietNam
- Tester Sangyo VietNam
- Brugger Feinmechanik VietNam
- Kracht Corp VietNam
- Thwing Albert VietNam
- Guenther VietNam
- ThermoTech Sensors VietNam
- Dwyer VietNam
-
Trực tuyến:4
-
Hôm nay:332
-
Tuần này:5869
-
Tháng trước:11578
-
Tất cả:1965862